| Power | - 208 - 240VAC， 50/60 Hz, single phase
- 5000 W Max.
- 30A breaker is required
- 10 feet's power cable is included without a plug
|
Vacuum chamber
| - The chamber is made of SS304 with water cooling jacket
- KG63 vacuum port, which can connect a tubo pump directly.
- Vacuum level: 10-6 torr at room temperature.
- 1/4 gas inlet and outlet with valve are included
- Two flowmeters are built-in
|
Heating chamber
| - The heating zone consists of 3 mm Moly rod
- Moly sheet is around the heating zone as thermal insulation by reflection
- Heating zone dimension: 200 mm diameter x 400mm depth
- One sliding sample stage is included
- Moly heating element only can be used under high vacuum ( > 10-3 torr) or inert gas
|
Temperature control
| - Eurothero 3000 programmable temperature controller with over-temperature protection
- Touch screen control panel for easy setup and recording of temperature profiles
- B type of thermal couples
- Temperature accuracy: +/- 0.1 °C
- Max. working temperature 1600°C
- Max. heating rate: 20°C / minute
- RS 485 port with software included for PC remote operation
|
Water Chiller
| - 16L/min recirculating water chiller is included
- Temperature range: 5 - 30°C
- Water Flow Rate: 16 L/min
- Water Tank: 12 Liters made of stainless steel
|
Vacuum Pump (optional)
| - Turbo-pump with KF 63 port is required to achieve 10-6 torr vacuum
- Please click the picture left to order a turbo pump with vacuum gauge
|
Hydrogen option
| - The furnace can be used as a hydrogen furnace with MTI hydrogen burning and a leak detection system
- Click the picture left to order at the extra cost.
- Without MTI safe hydrogen protection system, you can not run the furnace under hydrogen gas
|
| Compliance | - CE certified
- NRTL or CSA certification is available upon request at the extra cost
|
| Warranty | - One-year limited warranty with lifetime support
|
