Furnace Features
| - Two heating zones ( top and bottom) with ceramic rollers table in the middle to produce rapid heating
- Heating elements are made of SiC rods with max. 1400ºC working temperature
- The heating module is placed inside a vacuum chamber for atmosphere control from oxygen to inert gases.
- 800 mm L heating zone ( 112 Liter capacity )
- Dual programmable temperature controllers provide +/-1ºC accuracy
- Three flowmeters are installed for gas flow control
- An oxygen analyzer is built in for monitoring oxygen content during processing
|
Power | - AC 440V (+/-10%) , three-phase, 50/60 Hz
- ( 380VAC, 3 phases is available upon request )
- 35KW max
- 10-foot power cable included but without plug
|
Heating chamber
| - SiC rod as heating elements
- Heating Zone: L 800 mm x W 400 mm x H 350 mm ( 112 liter capacity )
- Constant temperature zone: 660 mm with +/- 5ºC
- Almina ceramic rods are middle of the heating chamber to hold the multi-crucibles
- Max. working temperature: 1300°C max (< 2 hours ) and 1200°C (continuous )
- Max heating rate: 10 ºC/ minute
|
Vacuum chamber | - The heating module is placed into a stainless steel vacuum chamber with
- KF 40 vacuum port
- Dail vacuum gauge
- Gas inlet and outlet port ( 1/4)
- Two hinged types doors for loading and unloading samples
- Vacuum level: 10-1 torr for the use of oxygen, and 10-2 torr for the use of inert gases
- Positive pressure: < 0.5 bar
|
Temperature Control
| - Two temperature controllers for controlling two zones independently via SCR
- PID automatic control with up to 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Over-temperature protection and alarm allow for operation without attendant(s).
- Two S-type thermal couples are included
- ± 1 ºC temperature accuracy for dwelling.
- RS485 Communications Port.
|
Crucibles (optional)
| - Four Alumina Saggar ( 330x330 x120 mm ) can be placed inside the furnace by the double layer
- Each alumina sagger can handle 20 kg NMC powder and 80 kg powder can be sintered per batch
- 24 small alumina saggers (140x140x66 mm) can be placed via two rows x 3 layers ( 4x2x3 )
- Each alumina sagger can handle 2 kg NMC powder, and 48 kg per batch
|
Space required
| |
Net Weight | |
Warranty | - One-year limited manufacturer's warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order replacements at related products below).
|
Compliance | - CE Certified
- NRTL(UL61010) or CSA certification is available upon request at extra cost.
|
Operation Instructions | |