Furnace Structure
  | - Vacuum chamber made of SS304 alloy with the dimension of φ360 x 480mm H
- Resistance heating (low voltage with a high current) up to 2000ºC
- Bottom loading of sample holder by the electric motor
- Turbopump system that provides a vacuum level of 10^-5 torr
- Touch screen control panel
- Water flow and pressure protection
|
Heating Element
 
| - Heating zone space: 130 mm diameter x 200 mm H
- Max. sample size: 100 mm Dia x 80 mm H with +/- 8ºC temp. uniformity
- Optional heating element: Graphite or W
- Graphite Heating element: 2000ºC Max
- W heating element: 2000ºC - 2200ºC
-
 Graphite Heater  Tungsten heater
|
Working Temperature Control
| - PLC Touch Screen Temperature control
- Two C-type thermal Couples are included: one for control and one for monitoring for max. 2000ºC
- AN optional IR temperature sensor is available for 2100 - 2500ºC at an extra cost
- PID control method with over-temp protection
Temperature stability: ±1°C
- PC operation software is included for remote operation and history recording
- Heating Rate: ≤10°C/min
- RT - 1000ºC ≤10°C/min
- 1000 - 1600ºC ≤8°C/min
- 1600 - 2000ºC ≤5°C/min
|
Utility Requirement
| - 116L / min recirculating water chiller is not included but required
- You may order two 116L/min water chiller below to cool the furnace jacket and electrode
- An Air compressor is required to drive the bottom sample holder. Please click the picture below to order
  
|
Vacuum
| - A turbopump system is included which can reach 10-6 torr in the cold condition
- Turbopump speed: 620L/S
- Vacuum port on the chamber: LF160
- The vacuum controller and the display is included
- Optional: you may choose the Ar gas purification system to replace the turbopump to keep the furnace running at O2 < 1 ppm at the same cost.
|
Power
| - AC 208V, 50/60Hz, three-phase
- 30KW
|
Dimension & Weight
| - 1700 L x 1170 W x 1950 H, mm
- 520 Kg
|
| Reference Video |  |
| Warranty | One-year limited manufacturer warranty with lifetime support (Consumable parts such as processing tubes, o-rings, and halogen lamps are not covered by the warranty, please order replacements at related products below). |
| Compliance | CE Certified
NRTL certification is available upon request at an extra cost |
