Furnace Features
| - Two-layer casing with air cooling.
- The inner is made of alumina polycrystalline fiber..
- Coated with high-temperature alumina to improve the reflectivity, the heating efficiency, and its service life.
- The bottom loading mechanism is built-in, which is driven by a DC motor for fast heating samples into the pre-heated chamber.
|
Power | - 208 - 240 VAC, 50/60 Hz, single phase
- Max. Power: 2.5 kW
- A power cable is included, but no plug
|
Working Temperature | - 1600 °C, continuously
- 1700 °C, < 30 minutes
|
Heating Chamber
| - L100 × W100 × H150 mm with 4 pieces of U-type MoSi2 heating element
- One 30 mm diameter hole is open on the bottom of the heating chamber
- One fibrous alumina rod is installed to insert an alumina crucible into the chamber via a lifting fixture
|
Heating Rate | - 10℃/min (room temperature —1400℃)
- 5℃/min (1400℃-1600℃)
- 2℃/min (>1600℃)
|
Thermocouple | |
Temperature Control
| - FA-YD518P-AG temperature controller is included.
- Proportional–integral–derivative control (PID control) and auto-tune function
- 30 segments programmed with ramping, cooling and dwelling steps
- Built-in over-temperature alarm and thermocouple failure alarm
- +/- 1 ºC temperature control accuracy
- Default DB9 PC communication port
|
Overall Dimension | L540 x W 500 x H 1000 (mm)
|
Net Weight | |
Warranty | - One-year limited warranty (Consumable parts such as heating elements, processing tubes, the crucible, and o-rings are not covered by the warranty, please order the replacement at related products below.
- Damage caused by the use of corrosive and acidic gases is not covered by the warranty.
|
Compliance | - NRTL or CSA certification is available upon request at extra cost.
|
Demo Video | |