Pneumatic Press
| - Max. Load: 10KN ( 1,000 kg )
- Max. The pressure is dependent on the sample area ( Load Force / Area = P)
- Pneumatic cylinder travel distance 95 mm Max.
- Working area: 260 mm W x 160 mm D
|
| Power Requirement | - AC220V ±10%, 50Hz/60Hz
- 2,100 W
|
Driven Gas
  | - Driven by any standard air compressor, which is not included. Please click the picture on the left to order.
- 0.7MPa
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
|
| Heating Platens | - Two heating platens with independent PID temperature control up to 150°C ± 5℃
- Working area: 260 mm W x 160 mm L
- Platen is made of Die Steel with HRC60°±2°
- The parallelism of top & bottom platens <15um
|
Pressure
| - Digital pressure display with a timing control
- Frontal manual adjustable valve for pressure tuning, 0.2~0.7MPa (1KN~4KN)
- Pressure Accuracy: +/- 0.5 kg
|
Product Dimensions
| - Hot Press: L488mm*W275mm*H642mm
- Control Console: L220mm*W489mm*H340mm
|
| Compliance | - CE approval
- NRTL certification is available upon request at extra cost. Please contact our sales representatives for a quote.
|
| Warranty | One-year limited warranty with lifetime support (rusted and damaged parts due to improper storage condition or maintenance are not covered by warranty) |
| Optional | - A battery analyzer is available upon request, and please choose at the link below:
|
Reference Video
| 
|
| Net Weight | 115 kg |
| Shipping Weight | 150 kg (330 lbs) |
