Features
| - Consistent tension controls for separator film delivery
- "Z" fashion stacking with a separation via a foot-switch
- Manually slidable fixtures enable accurate positioning and compactness of electrodes
- Unreeling rotors for separator film feeding adjusting fixture position
- Various sizes of the electrode are acceptable
- Automatic counting & zeroing for the numbers of the stack
|
| Working Voltage | - Single Phase, AC220V 50Hz
|
| Power | |
| Stacking Electrode Size | - Length: 80 ~ 200mm
- Width: 70 ~ 150mm
|
| Max. Electrode Thickness | - Piled up thickness 2~30mm
|
| Aligning Accuracy | - ±0.2 mm for stacked electrodes
|
| Acceptable Separator Roll Size | |
Core of Separator Roll
| - 3-inch core, mechanical clamping
|
| Suggested Air Pressure | 0.6 - 1.0 MPa
(Air compressor is not included in the standard package. Please click here to order)
Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
 pic1  pic2
|
| Product Dimensions |  1700mm(L) x 1200mm(W) x 2120mm(H) |
| Net Weight | 900Kg |
| Compliance | CE Certified
NRTL or CSA certification is available upon request at the extra cost |
| Warranty | - One Year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
