Effective Rolling Width
| 200 mm |
Roller Material & Size | - High strength hardening steel with hardness with RC > 52
- The Roller surface is plated by Cr for anti-corrosive
- Size: 96 mm Dia. x 220mm W
|
Roller Gap
| - 0~ 10 mm adjustable
- Note: The gap tolerance may vary with temperature raising as below
- RT - 100°C: 0.008 - 0.01 mm
- 100 - 150°C: 0.02 - 0.03 mm
- 150 - 250°C: 0.03 - 0.05 mm
|
Dial Gauge Accuracy | 0.01mm |
Rolling Thickness & Hardness | - Min. 0.01 mm
- Max. 10.0 mm
- Max. the hardness of sample to be rolled: < 40 HRC
|
Heating Temperature
| - Two digital temperature controllers with 30 segments programmable for control two rollers separately
- 250°C maximum ( <= 1 hrs suggested)
- Recommended Heating Rate: 1.3°C/minute
- Two heating elements are installed
- Power of each Heating Element: 1000W
- Temperature Control Accuracy: +/-5°C
- Two spare heating rods are included for replacement. Pls click pic left to see specs.
|
Power | |
Motor | - High torque motor with reducing gear, which can run under Ar gas safely
- Rated power 100W
- Digital speed Display: 0~26 mm/s
- Digital controlled with constant output power
|
Options | - For Roll to Roll, please consider below R2R device (click picture 1 & video to order)
- We can modify the rolling press into a vertical position at the extra cost (Pic. 4)
|
Dimensions
| - 620mm(L) x 280mm(W) x 470mm(H)
- Shipping Dimensions: 40" x 30" x 25" (D x W x H)
|
Weight | 100kg |
Shipping Weight | 280 lb |
Compliance & Warranty | - CE Certified
- MET certificate is available upon request at extra cost.
- One year limited warranty with lifetime support
- Rusting and damage due to improper storage conditions or maintenance are not covered by a warranty
|
Demonstration Video |
|
Warnings | - Do not touch the surface of the rolling part of the machine when the rollers are heated up or running.
- Due to the influence of working environments, the temperature on the roller surface may be different from the display on the controller. You may calibrate the temperature by EQ-TC-calibrator-LD, and refer to the instruction here from time to time to ensure heating temperature accuracy
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with the sheet's original thickness.
- Never calendering decrement over 0.02mm compared with original sheet thickness each calendering.
- Never roll materials with hardness > 40HRC
- Clean roller surface after each use and lubricate rollers when not used to avoid corrosion
- It is not allowed to use any MTI product in Class I environments (flammable gasses & vapor).
|