Power | - AC 220V, Single phase, 50/60Hz, 1500 Watts
|
Rollers
| - Roller Size: 100 mm Dia.x 100mm W
- Effective Cylinder Width: 96mm
- Roller hardness: HRC 52
- The thickness of rolling: 0~1.8 mm adjustable
- Warning: Never roll materials with hardness >40HRC because rollers are softened at 200℃.
- Optional: 2-3 layer vertical rolling machine is available upon request at the extra cost
|
| - Two independent temperature controllers enable dual-zone temperature control for the front and rear rollers.
- Temperature range: RT - 200°C with 30segments programmable
- Temperature accuracy +/-5°C
- Max heating temp: 200°C <30min
- Continuous heating temp: 190°C
- Two heating elements are installed
- Power of each Heating Element: 500 Watts
- The heating rod is consumable. Please click the picture left to order a replacement
- Heating Rate:
- RT-100°C: ~3°C/min
- 100-150°C: ~2.5°C/min
- 150-200°C: 1~2°C/min
|
Rolling Speed
(Pic. 1) (Pic. 2)
| - Two high torque 24VDC brushless motors to control the rollers independently.
- Speed control: 0.5-12.5 RPM adjustable via touch screen
- Actual rolling speed: 2.6~65 mm /sec (Actual Speed = display value * 0.65 )
- Two rollers are aligned horizontally and supported by the steel frame. Such a design allows users to gravity-feed flexible materials front above the rollers and collect at the bottom. (Pic. 1)
Independent speed control is available upon request at the extra cost. (Pic. 2) - Digital controlled with constant output power
|
Pressure Indication
| - Digital pressure display with a built-in load cell.
- Pressure display: max pressure and real-time pressure.
- 0 ~ 2T (the unit display is Kgforce) depending on the gap
|
Digital Gauge (Roller Gap) | - Resolution: 0.001mm
- Manual adjustment for rolling gap
-
|
Control Units
| - Separated Control Unit to control all parameters, including
- The touch screen panel controls
- Two rolling speeds, ( 0.5-12.5 RPM)
- The temperatures control for two rollers independently with 30 segment programmable
- The pressure display during the rolling
- RS485 port and PC operation software is available at the extra cost
|
Dimensions
| - Click the picture to see details
|
Material Feeder (Optional Purchase) | |
Weight | 100kg |
Shipping Weight | 200 lb |
Compliance & Warranty | - CE Certified
- NRTL or CSA certificate is available upon request at extra cost.
- One year limited warranty with lifetime support
- Rusting and damage due to improper storage condition or maintenance are not covered by warranty
|
Operation Instructions |
|
Warnings | - Never roll materials with hardness > 40HRC
- The rolling machine can be used in the Ar gas environment.
- Multi-step thickness calendering needed: While calendering the sample sheet, make each calendering decrement of 0.02mm compared with the sheet's original thickness.
- Never calendering decrement over 0.02mm compared with original sheet thickness each calendering.
- Clean the roller surface before and after each rolling process. Lubricate the roller surface when the machine is planned for idle to avoid corrosion.
- It is not allowed to use any MTI product in any hazardous location, especially prohibited from using in Class I environments (flammable gasses & vapor).
|