Power Requirements | • Input Voltage: 208 - 240V AC, three phases.- • Max. Current: 35A
- • Output: 15KW
|
Vacuum chamber
| • Vacuum chamber made of stainless steel with water cold jacket- • Vacuum Chamber dimension: 400 mm Dia. x 400 mm Highlight
- • Built-in Quartz window ( 120 mm dia ) for observation.
- • One KF25 and one KF40 vacuum port are built in the back of chamber (Pic. 1)
- • LF160 Port is built in the left of chamber for connecting to a turbopump.
- • Build-in high speed turbopump, which can achieve 6x10-6 torr vacuum level
- • Built-in crucible tilting mechanism to allow cast the melt into a mold ( Pic. 2)
- • Customized casting mold is available upon request at extra cost. (Pic.2)
- • Standard Alumina casting mold size: D50x90mm ( customized size available upon request )
- • Built-in secondary charger adding port with a feeding tank, which can add 3 types of chargers into
crucible during melting. ( Pic. 3- 5)
- • Pic 1 Pic 2 Pic. 3 Pic. 4 Pic. 5
|
Vacuum and Atmosphere | • High-speed turbopump ( 700 L/s) is included and directly connected to the chamber- • Vacuum level: 5x10-6 torr within 60 minutes
- • The furnace can fill inert gas up to 0.5 Bar.
|
Induction Heating
|
|
Temperature Control | • Programmable Temperature control with overheated protection via standard thermal couple or optical sensor up to 2100°C (please choose working temperature range before the order)- • K type T/C -- 1200ºC Max.
- • B type T/C -- 1700ºCMax
- • C type T/C - - 1800ºC Max.
- • IR optical temperature sensor: 2000 - 2500 ºC Max. ( optional )
|
Optional
| • Following devices are optional at the extra cost for better operation •
|
Compliance | • Built according to UL standard- • NRTL and CSA certification is available upon request
|
Warranty | - • One-year limited warranty with lifetime support
|
Application Notes | • Attention: A pressure regulator must be installed on your input gas tank ( click the picture below to review ) and have the output gas pressure set below 7 PSI at all times after opening the gas tank with the gas maintained in a
- • Click here to learn more about the installation of a gas regulator.
- • The flow rate for gases should be limited to < 200 SCCM ( or 200ml/min )
|
Dimensions
| 1250 x1150 x 1500 ( L xWxH ), mm |
Net Weight
| ~500kg |
Operation Manual & Video |
|