Furnace Structure
|
• Double shell steel case with cooling fan can keep outside case cool- • High purity alumina fiber insulation for max. energy saving
- • New designed retention latch provides more safe working environment
(Please click the left picture for details)
|
Dimensions
|
• Chamber: 250x 250x 300 mm (10 x 10 x 12 inch), 19 Liter- • Overall: 600 x 780 x 620 mm (24 x 31 x 24.5 inch)
|
Power | 9.0 KW |
Voltage | AC 208V-240V single phase, 50/60 Hz (50A air breaker required)
Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and
NEMA 6-20P plug for AC 208~240V) |
Standard Working Temperature | 1600°C or 2912° F (continuous) |
Maximum Working Temperature (in different atmospheres)
|
• 1700°C (3092°F) in air <3 hours- • 1650°C (3002°F) in N2
- • 1170°C ~ 1450°C (2138°F ~ 2642°F) in H2
|
Heating Rate | 0~10°C / min (suggestion = 5°C) |
Temperature Accuracy | +/- 1° C |
Temperature Uniformity
|
• +/- 5°C over 120 mm (5") @ 1700°C- • +/- 2°C over 80 mm (3") @ 1700°C
|
Heating Elements | Super 1800 grade MoSi2 (30 x 420mm) |
Thermocouple | B-Type (Pt-Rh to Pt-Rh) with Alumina tube |
Temperature Controller
 |
• FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Temperature controller (optional)
 |
• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package
is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which
is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a
communication cable (RS485 - USB) and a software CD.
Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
|
Laptop, software & WiFi Control(Optional) | |
Optional
|
1/4" barbed Gas Inlet/Outlet can be installed on back panel of furnace ($99.95/ea.)
|
Net Weight | 160Kg |
Shipping Weight | 650 lbs |
Shipping Dimensions | 47x39x52" |
Warranty
|
• One year limited warranty with life time support. (Consumable parts such as sample plates and
heating elements are not covered by the warranty, please order the replacement at related
products below.)- • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under
the coverage of MTI One Year Limited Warranty.
|
Compliance |
CE/UL/CSA Certifcate
Please select the certificate in option bar:
CE Certificate only - CE mark only
CE Certificate & UL/CSA ready: CE approval, ready to pass UL/CSA certifcate at extra cost
UL certircate - UL apprval (UL 61010),
    
|
Application Notes
|
• For preserving the longevity of the furnace components, we recommend the heating rate not to
exceed 10 °C /min.- • Cooling rate shall also not exceed 10 °C /min.
- • This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with
this furnace without necessary safety controls and supervision. - • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a
normal occurrence and the cracks may be repaired with alumina coating. - • Please click here to learn how to DIY gas purging system.
- • Refractory block must be inserted before closing door.
|
Operation Instructions
|
 
|
