Furnace Structure
| • 1800 grade fiber alumina with reflective coating -- max energy saving design- • Double layer steel structure with air cooling fan to keep case temperature below 60°C
|
Dimensions | • Chamber: 200Lx 200W x 200D mm (8 x 8 x 8 inch), 8.4 Liter- • Overall: 550 x 540 x 620mm
|
Power | 5.2KW |
Voltage
| AC 208V-240V single phase, 50/60 Hz (32A air breaker required)
Note: Plug is not included, and it is suggested you use NEMA L5-30 / NEMA 10-30P plug for AC 110V and NEMA 6-20P plug for AC 208~240V)
|
Standard Working Temperature | 1600°C or 2912° F (continuous) |
Maximum Working Temperature | 1700°C or 3092° F (< 3 hours) |
Heating Rate | 0~20°C / min (suggestion =< 10°C) |
Temperature Accuracy | +/- 1° C |
Temperature Uniformity
| • +/- 5°C over 120 mm (5") @ 1700°C- • +/- 2°C over 80 mm (3") @ 1700°C
|
Heating Elements | Super 1800 grade MoSi2 Heating Elements (30 x 360mm) |
Thermocouple | B Type (Pt-Rh to Pt-Rh) with Alumina tube |
Temperature Controller
| • FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
|
Temperature controller (optional)
| • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which
is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
|
Laptop, software & WiFi Control(Optional) | • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us for
more information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Net Weight | 135 Kg (286 lbs) |
Shipping Weight
| 450 lbs |
Shipping Dimensions | 48" x 40" x 49" |
Warranty
| • One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.)- • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under
the coverage of MTI One Year Limited Warranty.
|
Compliance | • CE Certified- • NRTL or CSA certification is available upon request at extra cost.
|
Application Notes | • For longer furnace service life, we recommend the heating rate not to exceed 10 °C /min.- • The cooling rate shall also not exceed 10 °C /min.
- • This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with this
furnace without necessary safety controls and supervision.
- • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a
normal occurrence and the cracks may be repaired with alumina coating. - • Please click here to learn how to DIY gas purging system.
- • The refractory block must be inserted before closing door.
|
Operation Instructions |
|