Furnace construction
|
• Double layer steel structure with air cooling fan to keep the case's temperature below 60°C- • High purity alumina fiber insulation for max. energy saving
- • 1760 °C (3200 °F) Hi-Purity Alumina Coating inside the chamber for longer service life
|
Temperature Controller
 |
• FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Temperature controller (optional)
 |
• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop
package is available at the options bar.
Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm Controller to achieve 0.1ºC
accuracy， which is fully compatible with LabVIEW. This package includes a Eurotherm 3504
programmer, a communication cable (RS485 - USB) and a software CD. Click the pic left to
view the full spec of Eurotherm 3504 temperature controller.
|
Laptop, software & WiFi Control(Optional) |
• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for
immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us
for more information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Inside Chamber Size | 160mm x 150mm x 150mm (6.3" x 5.9" x 5.9"), 3.6L |
Furance Door Block Dimension | 138mm x 138mm (5.4" x 5.4"). Thickness: 60mm |
Standard Working Temperature | 1600° C or 2912° F (continuous) |
Maximum Working Temperature | 1700° C or 3092° F (< 3 hours) |
Heating Rate | 0 ~20 °C/min (≤10°C/min recommended) |
Temperature Accuracy | +/- 1° C |
Temperature Uniformity
|
• +/- 5°C over 120 mm (5") @ 1700°C - • +/- 2°C over 80 mm (3") @ 1700°C
|
Heating Element | Super 1800 grade MoSi2 Heating Elements (30 x 300 mm) |
Thermocouple | B-Type (Pt-Rh to Pt-Rh) with Alumina tube |
Working Voltage
|
AC 208V-240V single phase, 50/60 Hz (35A air breaker required)
Note: Plug is not included, and it is suggested you use NEMA L6-30P plug for AC 208~240V)
|
Max. Power | 4 KW |
Outside Size
|  515 x 500 x 730 mm (20.28" x 20" x 28.75")
|
Net Weight | 100 Kg (230 lbs) |
Warranty
|
• One year limited warranty with lifetime support. (Consumable parts such as sample plates and
heating elements are not covered by the warranty, please order the replacement at related
products below.)- • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not
under the coverage of MTI One Year Limited Warranty.
|
Compliance |
• CE Certified- • NRTL or CSA certification is available upon reuqest at extra cost
    
|
| Shipping Dimensions | 48" x 40"x 45" |
Shipping Weight
| 350 lbs |
Application Notes |
• Warning: MoSi2 heating element is used in the high temperature under the oxidizing
atmosphere. It will form the SiO2 film which can keep the element from being melted. During
the oxidizing process, the SiO2 protecting film is formed again when the element continues to
be used. The MoSi2 heating element must not be used in the temperature between 400 °C
and 700 °C for a long time, otherwise, the element will be cremated under the strong oxidizing
function in the low temperature.- • Please click here to learn how to DIY gas purging system
|
Installation Demo |
 
|
