Furnace Structure
|
• Double layer steel structure with air cooling fan to keep the case's temperature below 60°C- • High purity alumina fiber insulation for max. Energy saving
- • High-quality SiC heating elements
- • 60 mm quartz window with slidable shutter ( open shutter for observation and close it for heating )
 
|
| Inside Chamber Size | 150 x 150 x 149mm (6" x 6" x 6"), 3.6L |
| Standard Working Temperature | 1450° C (continuous) |
| Maximum Working Temperature | 1500° C (< 1 hours) |
| Heating Rate | 0 ~20 °C/min ( ≤10°C/min recommended ) |
| Temperature Accuracy | +/- 1° C |
Temperature Controller
 |
• FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
|
Temperature controller (optional)
 |
• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is
available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature Controller which is
fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication
cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504
temperature controller.
|
Laptop, software & WiFi Control(Optional) |
• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate
use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature profile,
manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us for more
information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
| Thermaocouple | S-type |
| Heating Element | SiC |
Power |
AC 208V-240V single phase, 50/60 Hz (32A air breaker required)
Note: Plug is not included. 30A plug is recommended (NEMA L6-30P).
|
| Max. Power | 4 KW |
Dimension
|  500 x 490 x 700 mm |
| Net Weight | 70 Kg (155 lbs) |
Optional |
• Ceramic tube (8 mm Dia, Length 150 mm) with flange can be added as a gas inlet port of KSL-1500X
Muffle Furnace
- .
|
Warranty |
• One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating
elements are not covered by the warranty, please order the replacement at related products below.)- • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the
coverage of MTI One Year Limited Warranty.
|
Compliance |
• CE Certified- • NRTL or CSA certification is available upon request.
    
|
| Shipping Dimensions | 45" x 40"x 48" |
Shipping Weight
| 380 lbs |
| Application Notes | Please clicks here to learn how to DIY gas purging system.
|
Attention Notes |
Performance degradation (i.e. furnace can not reach the maximum temperature 1500°C, or it is drawing a higher than normal working current) can be expected due to the use of aged SiC heating elements. It is necessary to replace all the heating elements if the above symptoms were seen.
|
| Operational Manual |  |
