Pressure Vessel Size
| - • Two kinds of the chamber: (pressing die cavity)
- º 30mm ID. x 110mm Height
- º 50mm ID. x 150mm Height
|
Dimension | ( 30mm ID) ( 50 mm ID )
|
Ma. Hydraulic Pressure in Chamber | |
Rubber O-ring | • Special rubber O-ring is consumable- • Each O-ring only can use 20 times
- • 20 pcs O-ring is included for each die
|
Hydraulic Machine | • 38 T for 30 mm ID- • 108 T for 50 mm ID
- • For safetyreason, the die only supply the customer who uses MTI CIP pressing machine
|
Operation Temperature | 10 - 40°C |
Maximum pressure holding time | 5 minutes (The time starts from the press reaches the target pressure value and ends by releasing the pressure) |
Shipping Weight & Dimension | TBD |
Warranty | • One year limited warranty with lifetime support- • Seal O-ring is consumable, not covered by warranty
|
Operation Video and Instructions | Operation Video O-Ring Installation
|
Application Notes |
|
Warning | • Never let the press hold the target pressure be longer than 8 minutes,- • It's normal that the target pressure decreases a little bit during the pressure holding time,
so never press the red nor the green button in this period. - • Pressure must be completely released first, then make sure the hand wheel and the pressure
release valve has been tightened before pressing - • If you order the die only and using your own press machine, , MTI is not resposnible for the
safety
|