EQ-CIP80-DIE is Complete CIP Die Set (Max. 200 Mpa Vessel) for 100 Tons Cold Isostatic Press, which has an 80mm ID x 180mm depth chamber up to 200 Mpa. It is an excellent tool for preparing 2" - 3“ sample with a much high-density.
Specifications:
Hydraulic cylinder pressure
0 - 100 T
CIP Vessel size
80 I.D. x 180D. mm
Vessel Pressure
• 0 - 200 Mpa
• 1 Mpa / 5 min
Gauge Displayed Pressure Value (Mpa)
Recommended
Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)
• You may use the liquid rubber to seal the sample to be CIP (Click the pic below to order)
Warning
• Never let the press hold the target pressure be longer than 8 minutes
• It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
• Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing