EQ-CIP60-DIE is Complete CIP Die Set (Max. 300 Mpa Vessel) for 85Tons Cold Isostatic Press, which has a 60mm ID x 160mm depth chamber up to 300 Mpa. It is an excellent tool for preparing 2“ ceramic sample with a much high-density.
Specifications:
Hydraulic cylinder pressure
0 - 85 T (100 T hydraulic press is required)
CIP Vessel size
60 I.D. x 160D. mm (330 ml hydraulic oil required - ~ 40mm to top)
Vessel Pressure
• 0 - 300 Mpa
• 1 Mpa / 5 min
• Warning: sealing rubber O-ring is consumable, and need replacing as the suggest as the table below
• 10 pcs sealing O-rings are included for replacement. Spare O-ring is available upon request
Gauge Displayed Pressure Value (Mpa)
Recommended
Max and a short time
Actual Force Applied on the Hydraulic Cylinder (Ton)
• You may use the liquid rubber to seal the sample to be CIP (Click the pic below to order)
Warning
• Never let the press hold the target pressure be longer than 8 minutes
• It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period
• Pressure must be completely released first, then make sure the hand wheel and the pressure release valve has been tightened before pressing
