EQ-CIP50-DIE is Complete CIP Die Set (Max.278 Mpa Vessel) for 50Tons Cold Isostatic Press, which has 50mm ID x 150mm H chamber up to 250 Mpa. It is an excellent tool for preparing much high-density ceramic rod, disk or target. compared to dry die pressing.
Specifications:
Hydraulic cylinder pressure
0 - 50 T
CIP Vessel size
50 I.D. x 150H, mm
Vessel Pressure
• 0 - 255 Mpa
• 1 Mpa / 5 min
Gauge Displayed Pressure Value (Mpa)
Actual Force Applied on the Hydraulic Cylinder (Ton)
• You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order
Warning
• Never let the press hold the target pressure be longer than 8 minutes,
• It's normal that the target pressure decreases a little bit during the pressure holding time, so never press the red nor the green button in this period.
• Pressure must be completely released first, then make sure the hand wheel and the pressure release valve has been tightened before pressing
