Pressure Vessel Size
| • 30mm Dia. x 110mm Height (pressing die cavity)- • Max sample height: 60mm
- • Hydraulic oil volume (with sample loaded): 40mm distance to the top edge.
- • Made of high strength alloy with stainless steel protective jacket
|
Dimenstion | |
Ma. Hydraulic Pressure in Chamber
| 300 Mpa ( 43500 PSI) |
Hydraulic Machine | 21 T |
Operation Temperature | 10 - 40°C |
Maximum pressure holding time | 8 minutes (The time starts from the press reaches the target pressure value and ends by releasing the pressure) |
Net Weight | 26 lbs |
Shipping Weight & Dimension | TBD |
Warranty | • One year limited warranty with lifetime support- • Seal O-ring is consumable, not covered by warranty
|
Operation Video and Instructions |
|
Application Notes |
|
Warning | • Never let the press hold the target pressure be longer than 8 minutes,- • It's normal that the target pressure decreases a little bit during the pressure holding time, so never
press the red nor the green button in this period. - • Pressure must be completely released first, then make sure the hand wheel and the pressure
release valve has been tightened before pressing - • If you order the die only and using your own press machine, , MTI is not resposnible for the safety
|