Structure & Dimenstion | |
| Pressure Vessel |
• 22mm ID. x 120mm Height- • max available sample height 70mm
- • Made of high strength alloy with stainless steel protective jacket
|
| Max. Hydraulic Pressure in Chamber | 300 Mpa ( hold for continuous )-- ( Press setting at 11.4 T )
380 MPa ( Hold less than 5 minutes) --{ Press setting at 15T ) |
| Hydraulic Machine | 15 T Max. |
| Operation Temperature | 10 - 40°C |
| Net Weight | 18 Lbs |
| Shipping Weight & Dimension | 22 Lbs, 9 In. x 7 In. x 6 In. |
| Warranty | One year |
| Operation Video & Instructions |
  ( for existing customer only )
|
| Application Notes |  
|
| Warning |
• Never let the press hold the target pressure be longer than 8 minutes,- • It's normal that the target pressure decreases a little bit during the pressure holding time, so never
press the red nor the green button in this period. - • Pressure must be completely released first, then make sure the hand wheel and the pressure release
valve has been tightened before pressing - • If you order the die only and using your own press machine, , MTI is not resposnible for the safety
|
