Features

• 
       •  Simple Operation: With an understanding of Bragg's law,
          an individual can learn the machine operation within minutes.
•      •  Precision:  Crystal orientation can be determined accurately
          within +/- 15" ( 0.0046° )
•      •  Safety:  Low X-Ray emission, automatic shutter and lead foil
          cover reduce exposure to radiation
•      •  Cost Effective: Features comparable to more expensive
          X-Ray diffractometers.

 
Power Supply / Power

• 
       •   Input AC 208 - 240V, 50Hz/ 60Hz, 250W  (The power plug is
            NOT included)
•      •   For 110V, 500W Transformer is required for this
           diffractometer.
•      •  The high voltage power supply is a discrete unit along with
           the diffractometer
  
  
•          .             
  
  

 
X-Ray Tube

• 
       •  Cu target, air cooling, Cu-Kα output
•      •  X-Ray tube with a monochromatic wave (Kα) filter improves
          accuracy.
•      •  Scintillation detector reduces harmful X-Ray radiations.
•      •  X-Ray tube is a consumable part with 2 years warranty.
          The additional X-ray tube is available. (See Table Standard
          Package of Machine below for price.
  
  

 Max. Tube Current

 5 mA at 35kV

 X-Ray Detector

 Max. Voltage at 1050V

 Measure Range
   
  Graduated Platform

 
 2 Theta : 10° ~ 140° ,  Theta : 10° ~ 70°
      
          

 Accuracy

 Digital display with measurement accurate within +/- 15"  ( 0.0046°)

 Sample Holder

• 
       •  One spring load wafer holder is included for holding a flat
           wafer or substrate smaller than 2". (See Fig.1 Fig.2)
•      •  One ceramic vacuum suction plate is included for holding a
           flat wafer or substrate larger than 2". (See Fig.3 Fig.4)
•      •  A 6mm OD tube is required for the compression fitting on the
          back of the vacuum suction plate. (See Fig.3)
  
  

     Fig.1 Substrate Sample Holder    

                Fig.2  Mounting Substrate     
           
                  Fig.3 Vaccum Suction Plate   

                Fig.4 Large Wafer Example with Pump              

 
Optional Parts

• 
       •  A Vacuum Pump is required for using vacuum suction plate.
•      •  A V-type Crystal Boule Holder is required for boule
          orientation measurement.
  
  

 Radiation Protection

• 
       •  Built-in automatic shutter prevents operation with the cover
          opened.
•      •  Lead foil reinforced plastic cover reduces radiation leaking.
•      •  Warning: The cover must be CLOSED during operation.
•      •  A high accuracy digital Geiger counter (or dosimeter. See
          picture below) is included for monitoring the radiation
•          º  High accuracy measurement with 0.05 - 9.99 uSv/h
              detection range
•          º  Audio and vibration high level alarm modes are
              available
•      •  The radiation level outside of the operating unit is measured
          as 0.07 uSv/h, which is the same as the background level,
          indicating good radiation protection from the unit

            high accuracy dosimeter          
             safe radiation level outside the operating unit

 Dimension of  X-Ray Machine

 500 x 650 x 400 mm  ( L x W x H )

 Dimension of Power Supply Unit

 500 x 500 x 500 mm

 Net Weight                                

 100 kg (220 lbs) 

 
Appending links for
 X-ray diffractometer

• 
       •  Radiation Safety Data Sheet
•      •  Bragg's Law and definition
•      •  How does DX-100 work based on Bragg's law
•      •    Product ManualHow to measure small crystal sample 
  
  

DX-103

V-type Sample Holder for Measuring  Crystal Boules up to 3" diameter 

EQ-OFP-14

120L/min Oillless Vacuum Pump