Ultrasonic Generator &
Power Controller
|
• Input power: 208 - 240 VAC, 50/60 Hz (A transformer can be
used for 110 V)- • Ultrasonic output: 0 - 130 W adjustable
- • Ultrasonic frequency: 40 kHz
|
Ultrasonic Converter |
• PZT (piezoelectric zirconate titanate crystal)- • Diameter: 25 mm
|
Converter Cable Length
| |
Spray Nozzle
|
• Two Spray nozzles with KF-25 Adapter included.
(click the below picture to see details)- º One cylindrical type - provides narrower spray pattern
~2 cm diameter - º One cone type - provides wider spray pattern ~4 cm
diameter - º KF25 quick clamp is included to connect the spray
head to KF25 port
- • Made of Titanium alloy (Ti-6Al-4V)
- • Spraying speed: 5 mL/min~ 40 mL/min
- • Fluid viscosity range: 1 - 50 mPa·s (cP)
- • Customized nozzle shape is available upon request at extra
cost.
-
 
|
Compressive Air Vortex Shaper (Optional)
| |
| Average Drop Size | |
| Compliance | |
Operation Instructions |
How to Operate Spray Pattern
 
|
| Warranty | - • One year limited warranty with lifetime technical support
|
Optional |
• You will need an Infusion Syringe Pump to carry and delivery
liquid for uniform coating. Please click the pictures below to
order digital or PC controlled Infusion Syringe Pump at extra
cost (Pic. 1, 2, 3)- • You may need a heating plate for the pyrolysis coating.
Please click Pic. 4 to order
- • You may need X-Y axis CNC stage to DIY a coater,
Please click Pic. 5 to order (Pic. 5)
- • Please put the device into a fume hood for safety and health
(Pic. 6)
- • For high Viscosity liquid， pleaseconsider120Kz ultrasonic
spray head。 （piC7））
- • Equipment listed on the DIY page are NOT naturally compatible
with each other. Please email us first to order customized
adaptor, the separate order may not fit.
- • DIY an Ultrasonic Spray and Electrospinning device.
 Pic. 1  Pic. 2  Pic. 3
 Pic. 4  Pic. 5  Pic. 6
 Pic. 7 |
