Features | - Two types of operation mode: foot pedal and automatic
- Digital display to count printing number
- Vacuum chunk to hold sheet faster and easier
- Printing knife is driven b compressed gas with constant pressure to ensure repeatable quality printing
- Printing length, width, and knife angle are adjustable for quality printing
|
Working Voltage
| - 208 - 240V Single Phase, 50/60Hz
- For 110V, a 100W Transformer can be purchased separately
|
Substrate Holder | - A substrate is held by the vacuum chuck with area 300 x 500 mm
- The vacuum pump is built-in the bottom of the machine
- Effective printing area: 280 x 350 mm Max.
- Substrate thickness: 0 - 80 mm adjustable
|
Screen Mask | - Screen mask and frame are not included
- Customized screen mask is available upon request at the extra cost
- Screen Mask Moving Range
- X-axis: 0 - 350 mm
- Y-axis: 0 - 15 mm
- Z-axis: 0 - 30 mm
|
Position adjustment & accuracy | |
Warranty & Compliance | - One year limited warranty
- CE certified
- NRTL or CSA certification is available upon request at an extra cost.
|
Compressed Gas Requirement pic1 pic2 | - The compressed air pump is required for operation
- 0.5-0.6 MPa pressure required
- Compressed Air pump is not included, please click the link below to order one if you don't have
- Attention: If a gas cylinder is used instead of air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
|
Video & Operation Instruction | Short Demo Video Installation Video |
Dimension | |
Net Weight | |
Shipping Dimension & Weight | |