| - Double-layer stainless steel structure for maximum safety
- The bottom loading mechanism by electric hydraulic lift ， which can hold 200 Kg Max. sample
- Water cooling front door and sealing jacket for max. service life.
- Touch-screen digital control panel for all parameters.
- Precision temperature control with +/- 3 ºC uniformity inside the chamber and +/-0.5°C accuracy.
|
Inside Chamber Size | - Heated chamber: 500 x 500 x 500 mm ( ~ 20" x 25" x 25" . 125 Liter capacity )
- Energy-saving 1800 grade fibrous alumina insulation.
- High purity Al2O3 coating.
|
Power | - AC 220V， three-phase; 50/60 Hz
- 40 KW
- 50Amp （ 80Aair-breaker）
|
Heating Element
| - 12 Pcs SiC heating element
|
Continuous Working Temperature | |
Maximum Working Temperature | |
Heating Rate | 5°C / min |
Temperature Accuracy | +/- 0.5 ºC |
Thermocouple | Two S type thermocouples (control thermocouple and secondary alarm thermocouple) |
Temperature Control
| - Eurotherm controller with PID automatic control via SCR (Silicon Controlled Rectifier)
- 30 programmable segments for precise control of heating/cooling rate and dwell time.
- Over-temperature protection and thermocouple failure alarm functions allow operation without attendant(s).
- +/- 0.5 ºC temperature accuracy.
- RS485 Communications Port
|
Gas Flow Control and
Vacuum Valve | - One flow meters ( 0~12L/min) is installed on the front panel of the furnace.
- One heavy-duty vacuum pump (CE certified) is built on the bottom of the furnace.
-
 is
|
Net Weight | |
Dimensions
| |
Warranty | One year limited warranty with lifetime support. (Consumable parts such as sample plates and heating elements are not covered by the warranty, please order the replacement at related products below.) |
Compliance | - CE Certified for the furnace, vacuum pump, and water chiller.
- NRTL (UL61010) or CSA certification is available at extra cost.（ please click mark below to learn details
-
 
|
Application Notes | |
Warnings | - ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
- In order to prevent oxidation/corrosion damages to the Mo heating elements, it is necessary to keep a constant inert gas (Ar preferred) flow throughout the entire process. This is the most effective way to carry out any by-products.
|
Operation Instructions | |
