Features
| Sealing Mode (Top, Side, and vacuum):
- MSK-115-III with Rubber Sealing blade and Manual Footswitch is specially designed for hot sealing the top side of the pouch cell with the tab extruded. Unlike hard-type sealing blades, the soft-type sealing blade is able to eliminate the sealing gap caused by the battery taps.
- Vacuum Sealing Mode: After electrolyte injection, The device will perform the final vacuum sealing for the pouch cell.
- Vacuum Standing Mode: Before the vacuum sealing, The device can do the vacuum standing for the electrolyte diffusion and degassing. The vacuum timer would be used for standing time control.
Please click pic.2 to watch the sealer operation video.
Please click pic.3 to see the vacuum timer operation for the vacuum standing.
 pic. 1  pic.2  pic.3
|
| Max. Sealing Dimensions | 200mm(L) x 150mm(W) |
| Edge Sealing Width | 5mm |
| Sealing Blade | Soft type (with rubber, suitable for sealing the case with the tab in between) |
| Power Supply | 110V or 208-240V selectable, Single Phase 50/60Hz
|
| Max. Power | 600W
|
Vacuum Level
| |
Sealing Pressure
| - 0~7Kg/cm² adjustable: Vacuum chamber lid and sealing die to need to be driven gas, Recommended driven gas pressure 60 psi.
- Please use high purity inert gasses (Ar or N2), when operating in the glove box. Using Air Compressor driven when operating outside the glove box.
- Air compressors and fitting are not included. Please click here to order or order from your local hardware store. Gas/Air tube size is 6.
|
| Sealing Temperature | 50 - 250°C adjustable with control accuracy of +/-2°C |
| Heating Timer | 0 - 99 seconds Adjustable |
Glove Box Compatibility
| - KF40 Feedthrough with all necessary wire and tube are included to allow operating inside Glovebox, which has a KF40 port (Click on the first and second pictures for details)
- Please use Inert gas when operating in the glove box.
   
- Attention: High purity inert gasses and a Vacuum Pump are necessary for operating the MSK-115A and MSK-115AL Vacuum Sealer, please order them from the related products below.
|
| Compliance | - CE Certified
- NRTL certification is available upon request at an extra cost
- Granted the patent 201220296252.X for the Pouch Cell Sealing Machine MSK-115-III since January 2013.
|
| Warranty | Year limited warranty with lifetime support |
Operation Manual & Video
|    
How to make pouch cell How to operate in a glove box How to control the vacuum time How to make a single layer pouch cell |
| Optional | - You may choose the compact machine below to make pouch cells inside the glovebox
 Case forming  Die Cutting  Stacking  Welding |
Product Dimensions
|  | Chamber Closed: 470L x 430W x 480H, mm
Chamber opened: 470L x 430 W x 560H, mm
Control Unit: 420L x 320 W x 220 H, mm |
| Net Weight | 150 lbs |
| Shipping Weight & Dimension | 215 lbs; 48" x 40" x 29" |
