Furnace Structure |
• High purity alumina fiber chamber with ZrO2 coating to ensure continuous temperature at
1700°C (up to 1750°C Max)- • Double layer steel structure with air cooling fan to keep case temperature low
- • Gas inlet and venting port are installed for using at oxygen or inert gas atmospheres
- • Drop down door design for easy sample loading
   
|
Dimensions
|
• Chamber: 120 x 120 x 120mm ( 4.7"x 4.7" x 4.7"), 1.7 Liters- • Overall: 380 x 410 x 620 mm (15" x 16" x 24.5")
|
Power
|
• 2.5 KW (Max)- • <1.5Kw if heating rate at 10°C/min
|
Voltage | AC 208V-240V single phase, 50/60 Hz (20A air breaker required) |
Standard Working Temperature | 1720oC (continuous) |
Maximum Working Temperature | 1750°C(< 2 hours) |
Heating Rate | 0 ~20°C / min (suggestion =< 10°C) |
Temperature Accuracy | +/- 1oC |
Temperature Uniformity | +/- 2°C over 80 mm (3") @ 1700°C |
Heating Elements | Kathal Super 1800 grade MoSi2 heating elements ( 4 pcs ) for long service life and without evaporation at high temperature |
Thermocouple | B-Type (Pt-Rh to Pt-Rh)with Alumina tube |
Temperature Controller
|
• FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Temperature controller (optional)
|
• MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package
is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature
Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504
programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to
view the full spec of Eurotherm 3504 temperature controller.
|
Laptop, software & WiFi Control(Optional)
|
• Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for
immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us for
more information. • Note: The software is only compatible with MTI’s Yudian Temperature Controller
 
|
Power Cable & Plug |
• 10 feet length 14-3 AWG heavy duty UL approved power cable is included
• The plug is not included. You can order from your local hardware store according to female plug
in your lab, or order from link below (30A plug)
|
Net Weight | 50 kg |
Shipping Weight | 80 kg (180 lbs) |
Shipping Dimensions | 480x480x790 mm |
Warranty
|
• One year limited warranty with lifetime support. (Consumable parts such as sample plates and
heating elements are not covered by the warranty, please order the replacement at related
products below.)- • ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under
the coverage of MTI One Year Limited Warranty.
|
Compliance |
• CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
（ please click marks below to learn details )
    
|
Application Notes |
• For preserving the longevity of the furnace components, we recommend the heating rate not to
exceed 10 °C /min.- • The cooling rate shall also not exceed 10 °C /min.
- • This furnace lacks vacuum sealing, toxic or explosive gases are not recommended for use with
this furnace without necessary safety controls and supervision.
- • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a
normal occurrence and the cracks may be repaired with alumina coating. - • Please click here to learn how to DIY gas purging system.
- • The refractory block must be inserted before closing door.
|
Operation Instructions
|
 
|
