RC-Ni-300 is a 300 mL reactor made of Ni-Base Super-alloy, which has excellent creep strength and anti-oxidation.
It can reach 1100 °C with a pressure up to 3Mpa under oxygen or inert gased.
It is an ideal tool for preparing advanced material by hydro-thermal method, especially heat treat sample under high oxygen pressure.
A solenoid valve is installed on the flange allows auto-pressure relief control.
Temp.
Control and Pressure Real-time Monitoring software is also included.
SPECIFICATIONS
Structure
•Please click drawing left to see detail structure •Warning#1 : For your safety,never face on top flange without protection methods. •Warning#2 : The high pressure vessel and furnace must be placed inside an explosive-proof box or case during using under high pressure. (Please check the images below for some idea, customized proof is available upon request)
Working Voltage
AC 208~240V, Single Phase
Pressure Vessel
•Made of Ni-Based Super-alloy GH747 (Click to download GH747 nickel based alloy datasheet) •Air cold falnge via aluminium heat radiator •Attention : Processing Vessel is consumable part, you can click picture below to order replacement or spare one. •Ni-Based Superalloy Hydro-thermal Reactor 300ml •Optional torque wrench is available here to avoid overtighten the flange bolts.
Reactor Capacity & Dimensions
•70 mm OD x 35 mm ID x 326 mm height •300 mL capacity
Working Temperature & Controller
•RT - 1100 °C Max. •Digital tmperature controller with 30 segment programmable •Temperature accuracy +/- 1°C
Working Pressure
•18 MPa ≤ 800 °C •13 MPa ≤ 900 °C •8 MPa ≤ 1000 °C •3 MPa ≤ 1100 °C
Pressure Monitoring and Relief
•Precision high pressure sensor (measurement Range upto 250 bar) installed on pressure vessel. •Pressure monitor can display pressure in Bar.
It also allows user to define the high pressure alarm set point. •When pressure reaches the alarm set point (Max.15Mpa), pressure inside the vessel will be released via the solenoid vavle installed on the flange.
For Max.pressure >15 Mpa, please shut off the manual needle valve nearby the solenoid valve.)
PC Control
•A MTS-02 control software is included for controlling and displaying temperature and pressure by PC •Strongly suggest you order a brand new labtop with pre-installed & tested software from us at extra cost. •PC control module is compatible with Labview software. •Pressure & Temp. Real Time Mornitoring :
Accessories
•SS316 needle valve with 1/4 pipe connector & Pressure gauge included •Two consumable Copper Gasket(63mm O.D) are included •Pls click picture to order spare :