MSK-NFES-3LD Electro-spinning equipment is a tabletop version for Nano fiber Electro spinning.
It features user friendly and task oriented design.
The ease of operation and competitive pricing places our equipment ahead of other products available in the market.
MSK-NFES-3LD syringe pump render a smooth and uninterrupted flow enabling uniform spinning.
Thel high voltage power supply delivers 0-30 KV output voltage range with a maximum current capacity of 0.5 mA.
A stationary target and Rotating mandrels of six different diameters are supplied along with the unit.
MSK-NFES-3LD model fume hood provides an enclosed atmosphere with transparent side walls to monitor the electro spinning process.
A common electronic control unit is integrated within the hood.
The hood also has features like exhaust fan, granite work surface and optional features like high bright halogen lighting, duct of custom dimension to be connected to an exhaust duct available onsite etc.
This model uses a microprocessor based control unit that interfaces the operations of the syringe pump and Mandrel.
Nanofiber Electrospinning unit is a system for producing ultra-fine fiber with diameter of 20 - 1000 nm.
The nanofiber has very high specific surface area, small diameter and large porosity.
There are more than 100 kind of polymers could be used as raw materials.
Such as PEO, DNA, PAA, PLA, and also protein, collagen, organics such as nylon, polyester, acryl resin, and PVA, PS, PAN, peptide, cellulose, so on and so forth.
Electrospray coating unit is an apparatus for electrospraying a coating material onto a substrate.
Compared to Electrospinning process, electrospray coating requires a lower viscosity solution and much higher voltage.
SPECIFICATIONS
Key Features
•Digital control of various features like Rotating mandrel speed, Spin Duration, Syringe pump flow rate etc. •Rotating Mandrel targets of varying diameters, Stationary target provided with the system. •System hood has features like Exhaust fan, halogen lighting and transparent door for monitoring electrospinning process. •Built-in Ark Protection Circuit
High Voltage Power Supply
•0 - 30 kV Single Output, 0.5 mA max Current •Digital Voltmeter and Current meter •Static Remal Device - Shorting Stick •Constant current/Constant Voltage mode of operation •Built-in Ark Protection Circuit
Syringe Pump
•To dispense from standard disposable or glass syringes from 2.5 to 60 ml •Syringe holder made of insulating material to work under high voltage conditions •Motor control through micro controller to control and indicate flow rate •Four Syringe dispensing system
Stationary Target
•SS Plate with grounding facility •Diamension 320 mm x 100 mm x 2 mm
Drum Collector
•Stainless steel drums of different sizes (Optional 2 mm ~ 100 mm diameter and is of 200 mm length)
•Rotational Speed : 300 - 4000 rpm •Actuator : Microprocessor controlled BLDC motor with hall sensor feedback •Speed stability : +/-1%
Fume Hood
•Standalone unit with in-built power supply and wiring for the heater, lighting atnd exhaus •Transparent glass windows on four sides for easily monitoring the electrospinning process •Foot Print : 1000 mm x 800 mm x 1260 mm •Construction Material: Stainless Steel, Aluminium & Glass •Epoxy coated for electrical insulation •Hazard lamp to indicate that HV power supply is on •Exhaust fan ventilation at the top of the hood which can be connected to an exhaust outlet available at the customer facility.
