MSK-NFES-4LD model electrospinning equipment is a complete unit for making Nanofiber or coating on substrate.
Its user friendly software, task oriented design, ease of operation and competitive pricing are certain features that place our equipment ahead of other products available in the market.
MSK-NFES-4LD syringe pump render a smooth and uninterrupted flow enabling uniform spinning.
Thel high voltage power supply delivers 0-30 KV output voltage range with a maximum current capacity of 0.5 mA.
A stationary target, an XY moving target and Rotating mandrels of six different diameters are supplied along with the unit.
MSK-NFES-4LD model fume hood provides an enclosed atmosphere with transparent side walls to monitor the electro spinning process.
The inbuilt heater can raise the process temperature up to 60°C.
A common electronic control unit is integrated within the hood.
The hood also has features like exhaust fan, granite work surface and optional features like high bright halogen lighting, duct of custom dimension to be connected to an exhaust duct available onsite etc.
Nanofiber Electrospinning unit is a system for producing ultra-fine fiber with diameter of 20 - 1000 nm.
The nanofiber has very high specific surface area, small diameter and large porosity.
There are more than 100 kind of polymers could be used as raw materials.
Such as PEO, DNA, PAA, PLA, and also protein, collagen, organics such as nylon, polyester, acryl resin, and PVA, PS, PAN, peptide, cellulose, so on and so forth.
Electrospray coating unit is an apparatus for electrospraying a coating material onto a substrate.
Compared to Electrospinning process, electrospray coating requires a lower viscosity solution and much higher voltage.
SPECIFICATIONS
Key Features
•User friendly software enables PC interfacing that helps the regulation and control of various features like Rotating mandrel speed, Spin Duration, Syringe pump flow rate, XY target movement etc. •Rotating Mandrel targets of varying diameters, Stationary target and Reciprocating XY target provided with the system. •System hood has features like Exhaust fan, halogen lighting and transparent door for monitoring electrospinning process. •Built-in Ark Protection Circuit
High Voltage Power Supply
•0 - 30 kV Single Output, 0.5 mA max Current •Digital Voltmeter and Current meter •Static Remal Device - Shorting Stick •Constant current/Constant Voltage mode of operation •Built-in Ark Protection Circuit
Syringe Pump
•To dispense from standard disposable or glass syringes from 2.5 to 60 ml •Syringe holder made of insulating material to work under high voltage conditions •Motor control through micro controller to control and indicate flow rate •Four Syringe dispensing system •PC based control with documentation of parameters like syringe diameter, flow rate, spray duration etc. •Manual height adjustment platform for the syringe pump to vary its height according to the target height.
Collector System
•We provide three type of collectors as standard accessory
(1) Drum collectors
○ 6 sets with various size : length 200 mm x dia 100, 75, 25, 12, 6.0, 2.0 mm ○ All hese drum collectors can be mounted on the standard drum collector assembly ○ Actuator : Microprocessor controlled BLDC motor with hall sensor feedback ○ Speed stability : +/- 1 % ○ PC based control with documentation of speed and duration
(2) Plate collector
○ 320 mm x 100 mm x 2 mm thick SS Plate with grounding facility
(3) XY Plate Collector
○ Plate Dimensions 300 x 200 x 5 mm ○ Plate Material : Stainless Steel ○ Grounding facility : Available ○ Programmable XY motion profile to control the nanofiber deposition characteristics ○ PC based motion control with documentation of parameters like speed, traverse, motion profile and duration
Fume Hood
•Standalone unit with in-built power supply and wiring for the heater, lighting atnd exhaus •Transparent glass windows on four sides for easily monitoring the electrospinning process •Foot Print : 1200 x 800 mm •Construction Material : Stainless Steel, Aluminium & Glass •Epoxy coated for electrical insulation •Static removal device - Residual charge discharge stick •Ambient to 60degree Celsius temperature contro •Hazard lamp to indicate that HV power supply is on •Exhaust fan ventilation at the top of the hood which can be connected to an exhaust outlet available at the customer facility.
Software
•Centralized software control of almost all of the electrospinning parameters •One software interface for syringe pump, XY target and rotating drum collecto •All of the process parameters can be saved as user program and retrieved for analysis or rerun •Laotop PC is included with pre-installed software for immediate use