MTI KOREA Battery

 
 
 
 
 
 
 

Crystal & Material

 
 
 
 
 

Thermal Processing

 
 
 
 
 
 
 
 
 

Plasma System

 

Microspheres-Nanospheres

 
 
 
 

Sample Preparation & Analysis

 
 
 
 
 

Material Analysis

 
 
 

Other Lab Equipment

 
 
 
 
 

Sample Handling

 
 
 
 

Knowledge Center
 

Jet Mill

 
  2. Power & Slurry Mill / Mixer
  3. Various Ball Mills
  4. Jet Mill
 
 
Large-Scale Jet Mill for Roll-to-Roll Dry Electrode Fabrication (100g - 2kg/hr) - MSK-SFM-AF100

Large-Scale Jet Mill for Roll-to-Roll Dry Electrode Fabrication (100g - 2kg/hr) - MSK-SFM-AF100

기본 정보
Product Name Large-Scale Jet Mill for Roll-to-Roll Dry Electrode Fabrication (100g - 2kg/hr) - MSK-SFM-AF100
Sale Price Call for Price
Product Code MSK-SFM-AF100
Quantity 수량증가수량감소
상품 옵션
 
MSK-SFM-AF100 is a high throughput lab-scale jet mill for materials with various hardness and properties. It grinds materials such as ceramic, magnet, ferrite, and metallic alloy into micron-scale powder with an output rate of 100g~2kg/hr. Abundant configurations can crush sticky or hard materials. The material feeder is a double-screw self-cleaning type, which is easier to disassemble than other feeders.

The jet mill grinds with a high-speed jet of compressed air or inert gas to collide the particles with each other. It is capable of outputting particles with the right size while continuing to muff particles above the desired size. Therefore, the ground product comes in a narrow size distribution and good uniformity. Particles are separated from the gas stream by cyclonic separation.

SPECIFICATIONS
Working Power
  • Gearmotor, AC 380V, 50/60 Hz, Three-phase
  • 11.55 KW
Working Principle


Structure  Diagram		                
Feeder
  • Power: 0.55KW
  • Input Weight: 1-5kg/hr, Self-clean Screw
  • Capacity: 5L
  • SUS304 Stainless Steel (Powder Receiving Chamber)
Jet Mill Features
  • Chamber Diameter: 100mm
  • Output: 100g~2kg/hr 
  • Working Pressure: 0 ~ 10 Bar
  • Gas Consumption Rate: 1.2 m³/min@10Bar
  • Zirconia milling chamber
  • An air compressor is required, but it is NOT included in the standard package.
  • The output particle size depends on material hardness and input particle size. For larger input particles may need 3-5 times milling to reach the smallest size.
Cyclonic Separation
  • SUS304 Stainless Steel (Powder Receiving Chamber), Internal Polishing, External Drawing
Particle Collector
  • Filter Area: around 4 square meters
  • SUS304 Stainless Steel (Powder Receiving Chamber), Internal Polishing, External Drawing
Air Compressor (Not included but required)
  • Power: 11 kW
  • Pressure: ~140 psi
  • Gas Flow: 1.2 m3/min
Optional
  • Pre-crushing may be needed to achieve finer particles during jet milling (Click the picture below left to order )
  • An optional sieve can be used to filter the sample to 100-200 mesh to meet the input requirements. Please click the picture below to view the MSK-SYU-3 sieving system and order at an extra cost.
  •        
Net Weight
  • 150 kg 
Dimensions

  • 1779mm (L) x 815mm (W) x 1946mm (H)

Warranty
  • One-year limited warranty with lifetime technical support
 
  

    Working days : Monday to Saturday

법인명(상호) : 엠티아이코리아 코퍼레이션(주) 대표자(성명) : 이청규 사업자 등록번호 안내 : [642-81-02515]통신판매업 신고 기타
전화 : 02-498-8820 팩스 : 02-498-8120 주소 : 04545 서울특별시 중구 청계천로 160 세운청계상가 518호
개인정보보호책임자 : 이청규(mti@mtikorea.co.kr) Contact : mti@mtikorea.co.kr 사업자 계좌번호 : 신한은행 140-013-598791 (예금주: 엠티아이코리아코퍼레이션(주))

엠티아이코리아 영남지사 (영남지사) 전화: 053-381-1998       팩스: 053-381-2009
Copyright © 2011 MTIKOREA. All rights reserved.