Features | - SS304 stainless steel flange with double high-temperature silicon O-rings
- Seven 1/4" union tube fittings welded on the flange, which is compatible for gas flow and temperature measurements
- Ideal for connection to any types of MTI tubes or half nipple, including quartz, ceramic, and stainless steel.
- The assembly is compatible with induction heating coils for heating and melting.
|
Flange
| - A Flange for 100mm O.D. tube with silicone O-ring seals.
- Two 1/4" union tube fittings with SS tubing used for atmosphere control, equipped with a needle valve and a ball valve
- One 1/4" union tube fitting with an o-ring set for temperature measurements
- One 1/4" union tube fitting is designed for vacuum pumping with a gate valve.
- Three spare 1/4" union tube fittings for other functions.
- Please contact MTI to customize different functions based on union fittings.
- Flange dimension illustration
-
|
Tube
| |
Crucible
| |
Thermocouple (optinal)
| - Thermocouple: K, S, B, C types.
- Ceramic sheath for each thermocouple feedthrough:
- 2 channels for single thermocouple
- 4 channels for dual thermocouples.
- Please contact MTI to specify the type of thermocouple and ceramic sheath.
|
Vacuum Level | |
Warning | - A refractory tube block is required in front of the flange to avoid silicone O-ring melting.
- Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.
- For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gasses with our flange assemblies. Please contact us with any con
|
Related Products | |