Features
| - Special designed flange for KSL-1100X-S-H
- Seal tube by tightening screws on the flange without any welding and glue.
- Made of Stainless Steel (SS304) with double high-temperature silicon O-rings on each flange.
- Click the picture below to order a digital vacuum gauge for mechanical gauge replacement.
-
|
Structure | - Mechanical Pressure Gauge
- Two Needle valves with barbed fitting for 10mm O.D. tube
- 1/4" tube fitting on the inside of the flange
|
Vacuum Level | |
Warning | - Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You order a ceramic block in related products.
- Please do not over-tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.
- For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies. Please contact us with any concerns.
|
Installation Video | |
Application Notes | |