Power | - Voltage: 208 - 240VAC , 50/60Hz, single phase
- Power:7.0 KW ( 50A air breaker is required )
- A power cable ( 3 meters) is included without the plug.
|
Features | - The solid powder will be sent to the reactor automatically at viable speed.
- compressive gas ( air or inert ) will blow powder into the heating zone for pyrolysis with CVD gases
- Pyrolysized powder will be passed through a cyclone and be collected into an air-tight container
|
Heating furnace
| - Vertical Split door design for easy installation of tube
- Separated temperature control unit
- Three heating zones: 900 mm total length (300+300+300 mm) with independent temperature control
- Max. working temperature: 1200ºC with
- Max heating rate: 10ºC/minute
|
Processing tube and Flanges
| - The quartz tube and flange are as in the picture 1-2below ( click to see details)
- A powder holder ( quartz tube: φ40*φ34*500mm) is inserted into the processing tube and connected to compressive gas and a flowmeter ( 15 - 150 L ) to make power fly to the heating chamber (Pic. 3)
- Pic. 1 Pic. 2 Pic. 3
|
Temperature Controller
| - Three digital temperature controllers are installed to control 3 heating zones independently
- 30 programmable segments for precise control of heating rate, cooling rate, and dwell time.
- Built-in PID Auto-Tune function with overheating & broken thermocouple protection.
- Over-temperature protection and alarm allow for operation without attendant(s).
- +/- 1 ºC temperature accuracy.
- Eurotherm 3000 precision temperature controller is optional with +/- 0.1ºC accuracy
|
Power Feeder
| - One air-tight powder feeder with a stirring blade and speed control is inserted into the processing tube as picture left, specs are as below
- 500 ml stainless steel container made of SS316
- Max. pressure: 0.1 Mpa
- Max. Vacuum: ≤5*10e-2 torr
- Feeding Screw: φ9 mm x L185 mm
- Feeding Screw rotation speed: 2.5 - 13 rpm/min
- Adjustable Feed Rate 1 - 8 g/hr (graphite powder)
- Feeding Particle Size: 10 -30 microns
- Torque value: 4.45 N.m
|
Cyclones and Filter
| - Two stainless steel cyclones are installed on a gas outlet to collect pyrolyzed powder with a yield of >70%. ( < 200 mesh )
- One stainless steel container is installed on the bottom of the cyclone to collect powder
- One filter is installed on the end of the cyclone to block the dust ( < 5 microns
|
Gases and Flowmeter | - One flowmeter is installed to control the gas flow rate. ( 15 L - 150L)
- Usually use Argon gas to float powder from bottom
|
Dimensions | 2000mm(L)×800mm(W)×2360mm(H)
|
Net Weight | ~330 Kg
|
Warranty | One-year limited warranty (Consumable parts such as heating elements, processing tubes, and o-rings are not covered by the warranty, please order the replacement at related products below.) |
Laptop & software (Optional)
| - Brand new laptop with Microsoft Windows 10 and Microsoft Office 2013 (30 days free trial)
- Software Temperature Control System (EQ-MTS01) enables the user to edit temperature profiles, manage heat-treatment recipes, and record and plot data.
|
Compliance
| - CE Certified
- NRTL or CSA certification is available at an extra cost
|
Reference Video | |