Furnace | - Double-layer steel structure with splittable cover
- High-purity Al2O3 fibrous insulation with Max. energy saving
- 170 mm length heating zone with Constant temperature zone 60 mm with +/- 1°C
- PID programmable temperature controller with +/- 1°C accuracy
- Max working temperature: 1700oC @ < 1 hr, and 1600ºC continuous
- One alumina tube (3.15" x 40" (80 OD x 74 ID x 1000 L) mm) is included
- The pressure sensor is built in to control chamber pressure automatically
- One MFC is built in to control the gas flow rate automatically
|
Airtight Flanges
| - Water-cold stainless steel flange with silicone O-ring and valves for airtight heat treatment
- One recirculating water chiller is included (Click Pic 1 for specs)
- The right side flange will be driven by an electric motor & compressive air to open or close
- One compressive pump is included ( click Pic. 2 for specs)
- A digital pressure sensor is built-in to control pressure from 1 Pa to 200 KPa automatically
- Max. The vacuum level can reach up to 10-4 torr, which is dependent on the vacuum pump.
- One rotary vacuum pump is included, which can reach a 10 Pa vacuum. ( Click Pic 2 for specs )
- The vacuum port and gas inlet & outlet are built-in ( Click Pic. left to see details)
- Pic. 1 Pic. 2 Pic. 3
|
Sample Stage ( Holder )
| - The sample stage is installed with a slidable flange on the right side
- One crucible holder ( made of alumina or graphite) is included to carry one 36 ml crucible ( Click Pic 1)
- Customized sample holders for multiple small crucibles are available upon request. ( Pic. 2) for high throughput
- Pic. 1 Pic. 2
|
Control Panel & Software
| - One 15" laptop computer with software is included
- PC will program all parameters, including
- Chamber pressure ( 1-200 KPa )
- Gas flow rate ( 0 - 2000ml/minute )
- Purging cycles ( 0 - 3 times )
- Temperature program ( heating rate, dwell time, and cooling rate ) up to 30 segments
- The flange closes/opens
- The RJ45 communication port is installed on the front panel to connect to the PC or wireless router to achieve remote control ( PC and router are available upon request at the extra cost )
- Communication code is opened to the existing customer to connect the device to robots for unmanned operation
|
Automation Collaborative Robot for sample loading (optional) | - Full automation with sample loading is optional via the integration with a robot arm.
. |
Power requirement | - 220VAC +/- 10%, ( 20A breaker ) single-phase , 50/60Hz
- 3KW,
- Power cable ( 3 meters ) is included without plug ( suggest connecting to power panel directly)
|
Warranty | One-year limited warranty with lifetime support (Consumable parts such as processing tubes and o-rings are not covered by the warranty, please order replacements for related products below.) |
Compliance | NRTL or CSA certification is available upon request at an extra cost. |
Dimensions and weight | - Click Pic to see details on Weight : ~200 Kg
|
Reference Video | |