Furnace Structure
| - The furnace consists of 16 small tube furnace modules with quartz tube 25 mm O.D. x 20 mm I.D. x 200 mm L
- Each heating module's temperature is controlled independently up to 1100°C
- Quick seal flange, vacuum gauge, and flow meter are installed to allows heat treatment under vacuum or flowing gas
- Processing 16 samples with different temperatures at compact space
- The furnace system consists of two units: a furnace heating modules and a power control unit
- The furnace can rock at variable speed
|
| Power & Working Voltage | - AC 220V +/- 10% , single-phase, 50/60Hz
- Maximum power 13 KW
- Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug
|
| Rocking Stage | - 16 furnaces are driven by the heavy-duty motor to swing
- Rocking angle: -15º to +15º
- Rocking frequency: 50/min (25 cycles/min), 1 cycle is -15º to +15º
|
Working Temperature
 | - Continuous Working Temperature 1000°C
- Maximum Working Temperature 1100°C (< 1 hrs)
- Temperature accuracy: ±1 °C
- Constant temperature zone:
- +/- 2°C within center 20 mm cubic zone
- +/- 5°C within center 55 mm cubic zone
|
Processing Tubes
& Flanges | - 16 pieces of High purity Quartz tube with 25 mm O.D. x 20 mm I.D. x 200 mm L are included
- 16 pairs of SS304 Quickly clamped flange with 1/8 gas inlet and outlet, as well as vacuum ports are built-in
- 16 pairs of needle valves are designed for gas inlet and outlet for gas flow control
- 16 vacuum ports in the back could be connected to the vacuum pump via 16 to 1 adaptor
- Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
- Max. Vacuum 10^-2 torr by a mechanical pump and 10^-5 torr by turbopump
  
|
| Temperature Control | - 16 channel heating tube is controlled independently by 30 segments programmable temperature controller
- 16 K-type Thermal Couples
- 6" Touch screen panel to set heating programs
- RS484 port is built-ing and software is optional for PC operation
|
Heating Rate | |
Heating Element | |
Compliance
 | - CE Certified
- NRTL (UL61010) or CSA certification is available at an extra cost
|
Warranty | - One year limited warranty with lifetime support
- We reserve the right to upgrade the furnace structure for better performance without notice
|
Dimension
 | - Furnace Unit: 1,850 mm x 700 mm x 1,770 mm
- Power Control Unit: 900 mm x 650 mm x 1,460 mm
|
Operation Instruction |  |
Warning & Note | |
