Furnace Structure
| - The furnace is consistent with six-tube furnace modules with quartz tube 50 OD x 460 L, mm
- Each heating module's temperature is controlled independently up to 1200°C
- Quickly sealed flange, Vacuum gauge, and flowmeter are installed to allows heat treatment under vacuum or flowing gas
- Processing six batches of samples with the different temperatures at compact space
|
Heating Element | - Ni-Cr-Al- resistance wire
|
Working Temperature
| - Max.Working Temperature 1200° C
|
Processing Tube
| - High purity quartz tube with Φ50X L 460 mm, 6 tubes included
- 4 flowmeters are included
- The quickly clamped flange of KF25 with mechanical vacuum gauge and needle valves
- Max. Vacuum 10^-5 torr by a turbopump
- Only one vacuum pump required via a KF25 port. Click the picture below to choose a vacuum pump
-
|
Temperature Control | - Six digital Programmable Temperature Controllers built-in
- Includes over-temperature and broken thermal couple alert.
- 6 channel heating tube is controlled independently by 24 segments programmable temperature controller
- 6 S type Thermal Couple
- Includes RS485 Communication port and PC control software, which can control and record the temperature of all 4 channel heater by one Laptop.
|
Heating Rate | |
Temperature Accuracy | |
Power & Working Voltage | - 10 KW, 208 - 240V single phase, 50/60Hz ( if 6 heating modules operation at the same time )
- Note: Power cable included but without a plug. Please install a plug on your own. You may purchase a plug from your local hardware store or browse our catalog for a compatible plug.
|
Compliance
| - CE Certified
- NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
Dimension
| 1200 L x 680 W x 1000 H, mm ( Pls click Pic to see details) |
Warranty | - One year limited warranty with lifetime support
- We reserve the right to upgrade the furnace structure for better performance without notice
|
Operation Instruction
| |
Warning & Application note | |