Furnace Features
| - 1400W 2.45 GHz microwave chamber
- Stainless steel and aluminum shield to protect from microwave radiation
- Rapid heating up to 20 ºC/minute speed
- Heating module inside microwave chamber with max. working temperature 1200°C
- Precision temperature control with 30 segments programable within +/- 1ºC
- Vacuum casting thermal insulation material for max. energy saving.
|
Power | - 2000W
- 208-240VAC, Single phase, 50/60Hz
|
Microwave
| - Frequency: 2.45 GHz ±25 MHz
- Power Output: 1400W
- Microwave leaking: ≤ 3 mW/cm² at 1 meter away.
- One digital power controller is built in to adjust output power from 10 - 100%
|
Heating Module and Processing Tube
| - Ni-Cr-Al wire heating coin with 80 mm ID is installed inside fibrous alumina module (Pic. 1)
- The heating coil is placed inside the microwave chamber
- 2" quartz tube ( OD 50 x ID 44x L 600 mm) is inserted inside the heating module and microwave chamber to produce plasma (Pic.2)
- Pic. 1 Pic. 2
|
Flanges & Vacuum
| - One pair of vacuum flange is included to seal the quartz tube
- KF25 vacuum port and 1/4 gas inlet and outlet with needle valves are built-in the flange ( Pic. 1)
- One digital vacuum gauge is included for vacuum control ( Pic. 2)
- Max. Vacuum level: 10-2 torr by dry pump and 10-5 torr by turbopump.
- The pump is not included. Please click Pic. 3 to order separately. For CVD application, suggest choosing a dry pump.
Pic. 1 Pic. 2 Pic.3 |
Working Temperature | - Max. 1200ºC < 30 minutes with heating module assisted
- Min. 800ºC with heating module assisted
- ≤1100ºC continuous with heating module assisted and Plasma
- Heating rate: 1 ~20°C / min programmable
- ~750ºC heating by microwave only without temperature control
|
Temperature Controller
| - 30 segments programmable for heating rate, dwell temperature and time, and cooling rate
- SCR temperature control
- Over-temperature and thermal couple broken protection
- Control accuracy +/-1.0 ºC
- K-type thermal couple inserted through the flange
|
Net Weight | |
Dimensions
| - Microwave: 560(L) x 410(W) x 340(H) mm
- Total depth with tube and flange: 780 mm
- Controler: 600(L) x 520(W) x 265(H) mm
|
Warranty | - One-year limited warranty with lifetime support.
- Consumables, including crucibles, heating elements, and heat insulation materials are not covered by the warranty.
- ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under the coverage of MTI One Year Limited Warranty.
|
Compliance | - CE Certified
- NRTL or CSA certification is available upon request
|
Operation Video
| |