Features
| - Automatic bottom loading for easy operation
- Horizontal sliding baffle door for blocking thermal radiation
- Programmable temperature control up to 1600ºC with 24 segments
- Automatic thermal shock cycling is programmable up to 100 times
- Close the baffle door to preheat the chamber, then loading the sample for fast heating
- Open the baffle door to down-loading sample, then, close the door, and air blow the sample for fast cooling
|
Power | - Single-phase 220 VAC, 50/60Hz (20 A breaker required)
- 9 KW Max.
- 10-foot power cable is included, but without a plug
|
Heating Chamber @ Working Temperature | - Heating Chamber: 276 mm diameter x 300 mm H
- MoSiO2 heating elements
- 800°C - 1600°C continuously
- Recommended heating rate: ≤10°C/min ( 800 - 1400°C ) and < 5°C /min ( 1400 - 1600°C)
|
Bottom Load and Baffle Door
 
| - The bottom loading stage is driven by an electric motor, which has a 276 mm diameter and 20 kg max. loading weight
- The sliding baffle door is driven by a DC motor
|
Control Panel
| - Touch screen control panel for controlling temperature and thermal shock cycling
- Temperature control
- Eurotherm Temperature Controller inside
- 1 program, 24 segments programmed with ramping, cooling, and dwelling steps
- Built-in PID automatic control, Auto-Tune function with overheating & broken thermocouple protection
- +/- 0.1 ºC temperature accuracy
- B-type thermal couple
- Thermal shock cycling automatically via a program, as below
- Preheating chamber when closing the baffle door
- Open the door, loading the sample to the top chamber for fast heating at an ideal time
- Open door, load the heated sample down, then blow it by cooling fans
- Repeat the above procedure by setting the cycling time
- RS485 port is built-in for PC operation ( software is included )
|
Overall Dimensions
|  Click the picture to see the details
|
Net Weight | 500 kg |
Warranty | - One-year limited warranty with lifetime support (consumable parts such as processing tubes, and O-rings are not covered by the warranty, please order replacements at related products below.)
- ATTENTION: Any damages caused by the use of corrosive and acidic gases are not under the coverage of MTI One Year Limited Warranty
|
Compliance | - CE Certified
- NRTL / CSA Certification is available upon request at an extra cost
|
Operation Demo Video
| 
 |
