The KSL-1200X-M-AD is an automated box furnace with a maximum temperature of 1200℃, The furnace is operated by a PC and enables one-key automated execution of sintering processes via computer control, including closing the door, raising the temperature, dwelling, and cooling, and opening the door. It can be integrated with a robotic system to facilitate automatic sample loading, unloading, and retrieval. A single PC can control multiple units at the same time. SPECIFICATIONS:
Furnace Structure
Dual-layer shell structure
High-purity alumina fiber material furnace chamber
One laptop computer is included for automatic operation
Power
Voltage: AC220V+/- 10% , 50/60 HZ
Power: 7.5KW
3-meter power cable is included without a plug
Heating Chamber
300 x300 x300 ( mm), ( ~ 12x12x12")
27 Liter Capacity
Heating rate: ≤10℃/min
Thermal couple: K type
Uniform zone: 150x150x150 mm in center within +/- 5oC
Working Temp.
Max. 1200oC < 60 minutes
Continuous Working Temperature 1100°C
Temperature Control
PID automatic temperature control system
Intelligent 30-stage programmable control
Temperature control accuracy: ±1℃. (optional European temperature control accuracy up to ±0.1℃)
PC operation
One PC and pre-installed software are included to achieve automatic operation, including closing the door, raising the temperature, dwelling, and cooling, and opening the door.
RJ45 communication interface on the side panel, providing MODBUS RTU communication protocol for instrument control and door switch
One computer can control multiple furnaces simultaneously up to 8 units
Equipped with φ6.35mm gas inlet (rear) and φ30mm outlet(top) ports which allow the introduction of inert gas into the chamber
Automation Collaborative Robot for sample loading (optional)
Full automation with sample loading is optional via the integration with a robot arm.
Dimension
Weight
~ 200 Kg
Demo Video
Compliance
CE certified NRTL or CSA certification is available upon request
Warranty
One year limited with lifetime support --- including all electronic and mechanical parts only. Damaged parts caused by misuse: such as rusted parts from inadequate storage and broken parts by the user are not covered by the standard warranty.
We reserve the right to upgrade the furnace structure for better performance without notice
