Features
| - Easy touchscreen control
- Positioning of electrode slot with adjustable position and width
- Adjustable tension, winding speed, and winding cycles
- High winding alignment accuracy
- Manual loading and unloading of electrode sheets, automatic winding
- Settable separator tension control
- Small footprint for laboratory use
|
Input Power | - AC220±5% V, 50Hz, single-phase,
- 3 kW power
|
Winding Needle Width | |
Separator Width | |
Cathode / Anode Feeding | - Width: 98~247mm
- Length: 300~3000mm
|
Width of Strapping Tape | |
Working Environment | - No corrosive gases, liquids, or explosive gases near the equipment
|
Winding Accuracy | - Alignment accuracy between the separator and negative electrodes: ≤ ± 0.7 mm
- Alignment accuracy between the positive and negative electrodes: ≤ ± 0.7 mm
|
Compressed Air
pic1 pic2 | - Compressed air of 5~7kgf/cm²,100L/min is needed for the operation of this machine.
- Please note the air compressor is not included. Please click the picture on the left to order one at MTI, or order it from your local hardware store.
- Attention: If a gas cylinder is used instead of an air compressor(pic2), a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator
|
Optional | |
Size | - 2400mm L × 1700mm D ×1700mm H
|
Net Weight | |
Warranty | - One-year limited warranty with lifetime support
- Rusting or damage due to improper storage conditions or maintenance is not covered by warranty
|
Compliance
| - CE Certified
- NRTL or CSA Certification is available upon request at extra cost
|
Application Notes | - Place the machine on a flat surface free of vibration to avoid tipping the equipment
- Do not change the factory settings of air cylinders without consulting MTI. Beware not to change the air cylinder settings by accident.
- Take extra caution when operating the cutter and motor to avoid possible physical injury! Do not touch the cutter with your hand! Do not put a hand close to the cutter while the equipment is operating! Do not let hands, hair, or clothes get caught in the rolling-clamping-winding assembly! Put up warning signs and warn other people to stay clear of the equipment.
|