|
|
|
|
|
|
|
|
Electrode Slitting
Roll to Roll Micro-battery Electrodes Slitting Machine ( 3 - 10 mm Width) - MSK-CSC-350
The micro-battery electrodes slitting machine MSK-CSC-350
- Designed for the micro-batteries, typically, the Bluetooth batteries.
- Multiple (4+) narrow electrode strips slitting
- High precision / Tension control / Without the defects such as flounces, burrs, and indentation
Specification
Working Voltage | - 380V AC, Three-phase, 50/60 Hz
| Power | | Compressed Air
| - Compressed air of 0.7 MPa is needed for the operation of this machine
- Please note the air compressor is not included. Please click the picture below to order one at MTI, or order it from your local hardware store
- Attention: If a gas cylinder is used instead of an air compressor(pic2),
- a two-stage pressure regulator(pic1) must be installed on the gas cylinder to limit the pressure within the required working range for safe operation. Click here to learn the installation of a gas regulator.
pic1 pic2
| Reeling and Unreeling | - Automatic Tension control: 0 - 100 N, +/- 2 N;
- Maximum Reeling Diameter: 350 mm
- Maximum Unreeling Diameter: 450 mm
- Automatic unwinding correction, accuracy ± 0.5mm
| Cutting Width | - Total cutting width: 300 mm, Each electrode strip range: 3 - 10 mm width,
- No flounces, burrs, and indentation
- 4 or more narrow electrode strips slitting; the widths of the electrode strips are preset and fixed
- Replace the space jacket to manually adjust the width at extra cost
-
| Cutting Thickness | | Cutting Speed | | Product Dimensions | - 2,200 mm Length x 1,100 mm Width x 1,700 mm Height
-
| Net Weight | | Warranty | - One-year limited warranty and lifetime support
- Rusting and damage due to improper storage conditions or maintenance is not covered by warranty
| Operation Manual | |
|
|
|
Working days : Monday to Saturday
|
|
|