Structure
| • High purity fibrous alumina insulation for maximum energy saving.- • Heating elements on all three sides of the interior chamber for fast heating and enhanced
temperature uniformity. - • Double layer steel structure with air cooling fan to keep furnace's exteriors safe to touch.
- • Safety interlock will automatically power off the furnace when the door is opened.
- • Built-in vent port (top) to remove undesirable contaminants and moisture and extend the lifespan of
the heating elements and furnace.
|
Chamber Dimensions
| • Size: 12" x 12" x 12" ( 304 x 304 x 304 mm)- • Capacity: 27 liters (1728 cubic-inches)
- • Observation window of quartz ( 1/2" - 2" diameter ) is available upon request
- •
|
Power | • 7.5 KW Max. at 10 °C/min to 1200 °C- • 40 A Breaker (installed)
- • Note: Power cable included, but without the plug. Please install a plug by your own or click link
below picture to choose a plug according to your country or your lab requirement "
|
Voltage | 208~240V AC, Single phase, 50/60 Hz |
Max Operating Temperature | 1200 °C continuously
|
Temperature Stability
| ±1 °C |
Temperature Uniformity
| • +/- 5 °C over 120 mm @ 1100°C- • +/- 2 °C over 80 mm @ 1100 °C
|
Max. Heating Rate | 10 °C/min |
Temperature Controller
| • FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Temperature controller (optional)
| • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully
compatible with LabVIEW. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm temperature controller.
|
Laptop, software & WiFi Control(Optional) | • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables the user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost. Please contact us for more information.
- • Note: The software is only compatible with MTI’s Yudian Temperature Controller
•
|
Gas Fitting & Exhaust
| • One 1/4" barbed Gas Inlet installed on the back panel of the furnace. - • One gas exhaust port is built on the top of the furnace casing.
|
Product Dimensions
| 24" x 34" x 24" (D x H x W)
|
Shipping Dimensions | 48" x 40" x 50" (D x W x H) |
Shipping Weight
| 320 lb
|
Warranty
| • One year limited warranty with lifetime support. - • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under
the coverage of MTI One Year Limited Warranty.
|
Compliance
| • CE Certified- • NRTL (UL61010) or CSA certification is available upon request at extra cost.
|
Application Notes | • For longer furnace service life, we recommend the heating rate not to exceed 10 °C /min.- • The cooling rate shall also not exceed 10 °C /min.
- • This furnace lacks vacuum sealing, and it is not recommended to use toxic or explosive gasses in
this furnace without necessary safety controls and supervision.
- • Small cracks may appear on the surface of the refractory ceramics over extended use. This is a
normal occurrence and the cracks may be repaired with alumina coating. - • You may order alumina crucible by click picture below.
• click here to choose a crucible
|
Operation Instructions |
|