Features
| • Seal tube by tightening screws on the flange without any welding and glue.- • Made of Stainless Steel ( SS304) with double high-temperature silicon O-rings on each flange.
- • Click picture left to order 1/4" diameter thermal couple for the feedthrough at extra cost.
- • Click picture below-righ to order digital vacuum gauge for mechanical gauge replacement.
- • You may order quick connected flange for another end of flange.
|
Structure | • 1/4"ID Thermal couple or any tube/rod Feedthrough- • Mechanical Pressure Gauge
- • 1/8" NPS Valve
- • Barbed Fitting for 10mm O.D. tube.
|
Vacuum Level | |
Warning | • Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You order a ceramic block in related products.- • Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents.
The recommended torque is 35~40 inch-lbs. - • For liability considerations, MTI does not recommend or endorse the use of any toxic,
flammable or corrosive gases with our flange assemblies. Please contact us with any concerns.
|
Installation Video |
|
Application Notes | Click here to order a complete set. Click pic to choose other size flange Vacuum Pump & High Vacuum Station
|