Features | • Made of Stainless Steel with double high-temperature silicon O-rings on the flange. - • Stainless steel needle valve with 1/4" pipe adaptor.
- • 12mm push fitting for water pipes.
- • The assembly kit will seal one end of 50-52 mm diameter ceramic and quartz tube.
Vacuum meter is installed on one side of the flange.
|
Vacuum level | |
Installation Video |
|
Dimensions |
|
Optional Accessories | |
Application Notes | • MTI recirculating Water Cool System is the ideal tool for supplying cooling water to the flange set, please click the picture below left for more detailed products information. Click the picture below right to order.
- •
|
Warning | • Must put a refractory tube block in front of the flange ( see picture below ) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.- • Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents.
The recommended torque is 35~40 inch-lbs. - • For liability considerations, MTI does not recommend or endorse the use of any toxic,
flammable or corrosive gases with our flange assemblies. Please contact us with any concerns. - • Flange support may be needed to carry the flange weight at extra cost.
( click pic to choose another size flange )
|