Furnace Structure
| • Double layer steel casing with air cooling to keep furnace surface temperature lower than 60°C. - • High purity fibrous alumina insulation for Max. Energy saving.
- • Special refractory coating on iiner and heating element to increase furnace life
|
Power | 2.5 KW |
Voltage | AC 208-240 Single Phase, 50/60 Hz |
Max. Temperature | 1250° C (<2hrs) |
Continuous Temperature | 1200°C (Continuous) |
Max. Heating Rate | <= 20 oC /min |
Tube Size and Materials
| |
Thermal Block Placement
|
|
Heating Zone length | 440 mm ( single zone ) |
Constant temperature zone | 150 mm (+/-1° C) |
Temperature Controller
| • FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Temperature controller (optional)
| • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit.
- • You may upgrade the temperature controller to the Eurotherm 3504 Temperature
Controller which is fully compatible with LabVIEW. This package includes a Eurotherm 3504 programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of Eurotherm 3504 temperature controller.
|
Temperature Accuracy | +/ - 1°C |
Vacuum Seal & Upgrade
| |
Fitting Ports
| • To achieve high vacuum, you may replace the standard barbed hose fitting with the KF25 adapter; please click underline to order. • For supplying high purity gas, you may replace the standard barbed hose fitting with the VCR Face Seal Fitting; please click underline to order.
|
Vacuum Level
|
|
Heating Element | Fe-Cr-Al Alloy doped by Mo |
Dimension | 550 x 380 x 520 mm |
Net Weight | 40 Kg |
Shipping weight | 250 lbs |
Shipping package after crating | 48x40x40 inch |
Warranty
| One year limited warranty (Consumable parts such as processing tubes, o-rings, and heating elements are not covered by the warranty, please order the replacement at related products below.)
|
Laptop, software & WiFi Control (Optional)
| |
Compliance | • CE Certified- • All electric components ( >24V) are UL / MET / CSA certified
- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
(please click marks below to learn details )
|
Notice:
(click on the right to see detail) | |
Application Notes
Click here to learn more about the installation of a gas regulator. | • The tube furnaces with mullite tube are designed for using under vacuum and low pressure < 0.02 MPa / 0.2 Bar/ 3 PSI - • Attention: A two-stage pressure regulator must be installed on the gas cylinder to
limit the pressure to below 3 PSI for safe operation. Click here to learn the installation of a gas regulator. - • Never heat the furnace while the gas release valve is closed and a positive pressure condition
exists within the furnace chamber. The pressure gauge must be used to closely monitor the chamber condition at all times during the heating process; please open the gas release valve immediately once the chamber pressure has reached over 3 PSI to prevent unforeseeable damages. - • The flow rate for gasses should be limited to < 200 SCCM ( or 200ml/min )
- • Vacuum limit definition for all mullite tube furnaces: * Vacuum pressures may only be safely
used up to 1300°C - • NOTE The mullite tube shall be considered as a consumable part. We strongly recommend
user keep spare tubes in order to ensure the continuity of operation. The tube is not covered by Warranty. Use the link to order more.
|
Operation Instructions | |