• 
       •  Double-layer stainless steel structure for maximum vacuum and safety, which can stand at positive pressure
          up to 0.06Mpa and vacuum up to - 0.09Mpa
•      •  Water cooling front door and air cooling shell
•      •  Built-in Pressure gauge, vacuum valves, and two gas flowmeters.
•      •  The furnace be used with Inert gas  or  low vacuum ( 10-1 torr by the mechanical pump)
•      •  Also can be used with pure oxygen with the modified power connection.  Please call us if you use oxygen.
  
  

Chamber Interior

• 
       •  Five sides heating, e.g. left, right, bottom, back, and front, to achieve better temperature uniformity than
          three sides heating.
•      •  Energy-saving 1500 grade fibrous alumina insulation
•      •  High purity and reflective  Al2O3 coating for max energy saving.
•      •  Kanthal 1350°C grade Fe-Cr-Al resistance heating wire
•      •  Heated chamber:  400x 400x 400 mm (~ 16"x16" x16"), 64 Liter
•      •  Optional：500x500x500 mm ( 125 L ) heating chamber is available upon request
  
  

Working
Temperature &
Constant
Temperature Zone

• 
       •  Continuous Working Temperature 1100° C
•      •  Maximum Working Temperature 1200°C (< 1 hrs)
•      •  Constant temperature zone:  
•          º  +/- 1°C within center 250 mm cubic zone
•          º  +/- 5°C within center 300 mm cubic zone
  
  

• 
       •   35 kg

Temperature Controller

• 
       •  FA-YD518P-AG temperature controller is included.
•      •  Proportional–integral–derivative control (PID control) and auto-tune function
•      •  30 segments programmed with ramping, cooling and dwelling steps
•      •  Built-in over-temperature alarm and thermocouple failure alarm
•      •  +/- 1 ºC temperature control accuracy
•      •  Default DB9 PC communication port
•      •  MET Certified
  
  

The temperature controller (optional)

• 
       •  MTS02-Y Temperature control software kit (for YD518P series controllers) + brand new laptop package is
          available at the options bar. Click for the detail information about the MTS02-Y software kit.
•      •  You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully
          compatible with LabVIEW with +/- 0.1ºC accuracy.   This package includes a Eurotherm programmer, a
          communication cable (RS485 - USB) and a software CD. Click the pic left to view the full spec of the
          Eurotherm temperature controller. 
  
  

Thermocouple

• 
       •  Omega Dual K Type Thermocouple 12"L 1/4" OD

Heating Rate

• 
       •    < 10 °C / min recommended
•      •   20 °C/ min Max.    
  
  

Temperature Accuracy

•      •  +/- 1°C

• 
       •  Two larger flowmeters are installed in the front panel of the furnace to allow two types of gas mixing and
          flowing at the same time
•      •  One KF 25 vacuum port is installed in left of furnace to remove air by vacuum pump before filling gas
•      •  One heavy duty vacuum pump ( CE certified ) built in bottom furnace.  You may  choose a UL certified
          pump at extra cost
  
  

• 
       •  A 16L/min recirculating water chiller is included for cooling furnace
•      •  Short water power off and Over temperature alarm built-in
  
  
  
  

• 
       •  All type inert gases such as N2 and Ar  at《 0.03Mpa.
•      •  Pure oxygen gas 《 0.03Mpa.  but need modifying internal connection wire for anti-oxidation, please call us
           in advance if you use O2 gas
•      •  Low vacuum 10-1 torr due to
  
  

Power &  Working Voltage

• 
       •  9.5 KW, 208 - 240V single phase,  50/60Hz  
•      •  Three-phase, AC 380V - 460V available upon request.
•      •  Note： Power cable included, but without a plug. Please install a plug by your own
  
  

• 
       •  CE Certified
•      •  NRTL (UL61010)  or CSA certification  is available at extra cost.（ please click mark below to learn details

Dimension & Net Weight

• 
       •  H2050mm  X W 1280mm  x 1200 L
•      •  Net weight:  476 Kg
  
  
  
  
  

Shipping Weight & Dimension

• 
       •  2000 lbs
•      •  58" x 54"x 91"
  
  

Warranty

Demo Video
Operation Instruction

Warning &
Application note