Structure | • Five sides heating ( left, right, front, back, and bottom ) to achieve more uniform temperature zone.- • One SiC sheet is placed on the bottom of the chamber ( top of the heating element ) to support
heavy sample load up to 100 kg. - • Double temperature controller to ensure furnace never overshoot
- • Thermal efficient ceramic (high purity alumina fiber) insulation surrounding the chamber provides
maximum energy efficiency. - • Heavy duty double layer structure with the cooling fan to keep furnace exteriors safe to touch.
- • Built-in vent port removes undesirable contaminants and moisture; extends the life span of the
heating elements and furnace.
|
Chamber Dimensions
| • 16 " x 16'' x 16'' (D x H x W) (40x40x40 cm)- • Capacity:64 liters/ 4100 cubic-inches/ 2.37 cubic ft
|
Power
| • 8800 Watts- • Note: Power cable included, but without the plug. Please install a plug by your own or click the
link left the picture to choose a plug according to your country or your lab requirement
|
Current Rating | 45 A |
Voltage
| AC 208 - 240 Single phase, 50/50Hz |
Operating Temp Range | • 100-1100°C-Max continuously- • 1200°C-Max under an hour
- • Note: for using =>1000°C, furnace block must be placed front chamber.
|
Stability at 1000oC | +/- 1oC |
Uniformity at 1000oC | +/- 5oC within 250 x 250 x 250mm space |
Max. Heating Rate | 20°C/ min |
Temperature Controller | • FA-YD518P-AG temperature controller is included.- • Proportional–integral–derivative control (PID control) and auto-tune function
- • 30 segments programmed with ramping, cooling and dwelling steps
- • Built-in over-temperature alarm and thermocouple failure alarm
- • +/- 1 ºC temperature control accuracy
- • Default DB9 PC communication port
- • MET Certified
|
Optional +/- 0.1ºC Controller | • MTS02-Y Temperature control software kit (for YD518P series controllers) + 15" laptop package is available at the options bar. Click for the detail information about the MTS02-Y software kit. - • You may upgrade the temperature controller to the Eurotherm Temperature Controller which is fully
compatible with LabVIEW and provide +/- 0.1ºC accuracy. This package includes a Eurotherm programmer, a communication cable (RS485 - USB) and a software CD. Click the pic below to view the full spec of the Eurotherm temperature controller.
|
Laptop, software & WiFi Control(Optional) | • Brand new laptop with Microsoft Window 10 and Microsoft Office 2013 (30 days free trial) for immediate use.- • Labview Based Temperature Control System (EQ-MTS01) enables user to edit temperature
profile, manage heat-treatment recipe, record and plot data for MTI furnaces. - • A wireless remote control provides up to 300 meters operating range.
- • Above features are available upon request at an extra cost (up to $1,000). Please contact us for
more information. - • Note: The software is only compatible with MTI’s Yudian Temperature Controller
|
Optional
| 1/4'' Barbed Gas Inlet/Outlet can be installed on the back of furnace upon customer's request. ($99.95/each) |
Overall Dimensions
| 26" x 28'' x 28 (DxHxW)
|
Shipping Weight | 300 Lbs (shipping by pallet) |
Warranty | • One-year limited warranty with lifetime support. - • ATTENTION: Any damages caused by the use of corrosive and acidic gasses are not under
the coverage of MTI One Year Limited Warranty.
|
Compliance | • CE Certified- • NRTL (UL61010) or CSA certification is available at extra cost.
|
Application Notes | • This furnace lacks vacuum sealing, toxic or explosive gasses are not recommended for use with this furnace without necessary safety controls and supervision. - • Small cracks may appear on the surface of the refractory ceramics over extended use.
This is a normal occurrence and the cracks may be repaired with alumina coating.
- click here to choose a crucible
|
Operation Instructions |
|