Input Voltage | |
Output Power | • 1600 VDC- • 250 W
- • 150 mA max.
- • Built-in over current protection (>150 mA)
|
Sputtering Head
| • 2" flexible magnetron sputtering head with water cooling jacket is included - • One manually operated shutter for target protection
- • Sputtering head holder is available for holding sputtering head while non-operation
- • The distance between the sputtering head and sample stage is adjustable from 60 - 100 mm
- • One Water Cold Recirculating Water Chiller 16 L/min Flow is included for cooling sputtering head
. . . .
|
Vibration Stage
| • The vibration stage is built-in the bottom of the vacuum chamber- • The vibration speed is adjustable from 400 - 2000 RPM (6 - 33 Hz)
- • One 2" container of powder is placed on the vibration stage. It will rotate during the vibration
- • Suggested powder quantity: < 500 mg max.
- • Suggested particle size: 1 ~ 1000 microns
|
Vacuum Chamber
| • Quartz glass tube, 165 mm OD. X 150 mm ID x 250 mm Height- • Please click here to order the Quartz Chamber replacement
|
Control Panel | • 6" color touch-screen control panel with PLC integration for easy operation- • One panel for all parameters monitor and control: vacuum, current
|
Ultimate Vacuum Pressure | • Built-in KF25 vacuum port- • The system requires an Ar gas tank with pressure regulator (not included)
- • < 1.0E-2 Torr by Vane vacuum pump (not included) for Au, Ag, Pt, Cu, Mo targets
(not sensitive to air) - • < 1.0E-5 Torr by Turbomolecular pump (not included) for Al, Mg, Li, Lr, Ti, Zn targets
(sensitive to air) - • The lowest vacuum may reach < 4.0E-6 Torr by pumping overnight and baking
|
Gas Atmosphere | • One needle valve installed to allow Ar gas inlet to achieve better plasma coating- • The system requires an Ar gas tank with the pressure regulator (not included)
|
Target
| • One 2" Copper target is included for testing, target size: 2" Dia. x 2.5mm- • It also can coat Ag, Al, Cr, Ni, Pt, Ti, Sn, Li, Mg, etc. almost every kind of metallic material
- • Warning: Aluminum, Chromium or Nickel can be coated by this machine, but please view the
Recommend Coating Method in the below target link - • Please using RF Plasma Magnetron Sputtering coater for coating non-conductive materials and
carbon |
Overall Dimension
| (Click the pic to see detail size)
|
Net Weight | |
Shipping Weight & Dimension | - • 160 lbs
- • 45" x 45" x 40"
|
Operation Instructions | |
Compliance
| • CE approval- • NRTL (UL 6100) certification is available upon request at an extra cost, please contact our sales
representative for a quote |
Warranty | - • One year limited with lifetime support
|
Application Notes
| • Warning: Sputtering head connects to HIGH voltage. The operator must wear gloves during operation- • Make sure the target, sputtering head, substrate, and heating stage are clean before coating,
need to use the sandpaper and alcohol to clean and fresh the Al or Nickel target each time using - • Note: the powder must dry and disperse well before coating
-
|