PTL-SC-6-LD Coating System has been designed to automate the entire process to avoid operator fatigue and errors associated with it. In manual SILAR process, the operator has to perform hundreds of repetitive dipping into the solution and water. It is very difficult to control dip duration and number of dips in a manual process which can last hours. In the automated unit, the operator just needs to clamp the substrate into the holder and program the controller with required dip cycles and duration.
PTL-SC-6-LD has 6 positions sample holder for programmable. The dipping speed, dip duration, retrieval speed and dry duration can be set for each beaker station, and one hot plate on the bottom can heat all breaker up to 80°C. In this technique, the thin film is deposited on glass substrate following a chemical technique called successive ion layer adsorption and reaction (SILAR). The technique involves multiple dipping of the substrate in a given solution and D.I. water, both temperatures can be varied from case to case.
SPECIFICATIONS:
| Actuator | Stepper motor |
| Drive Mechanism | Lead screw |
| Dip Duration | 0 - 99 seconds / minutes / hours |
| Speed Control | Drawing speed adjustable by digital panel from 1 to 9999 μm/s or from 1 to 12 mm/s for each breaker station independently |
| Number of Cycles | 1 - 999 |
Power Input |
• Single phase 208-240VAC, 50/ 60Hz 600 W max. (with heater)- • Power cable included but without the plug. Please install a plug by your own or click the link to choose a
plug according to your country or your lab requirement.
|
Stroke Length Max.
| 75 mm |
Sample Holder
|
• Three sets of sample fixture can load up to 18 samples (each sample fixture can hold 6 sample slide)- • Six 150ml glass beakers are included for immediate use
-
 
|
Control Unit |
• Speed control via LED display with 8 programs memory- • Temperature control by a digital controller with +/-1°C accuracy up to 80°C ( Bottom heating plate for all breakers )
|
Product Dimensions |
|
Certificate |
• All electric components ( >24V) are UL / MET / CSA certified (except heating element)- • The furnace is ready to pass TUV(UL61010) or CSA certification at extra cost.
（please click marks below to learn details )
 
|
| Warranty | One year limited with lifetime support
|
| Compliance | All electric components are UL certified and the machine is ready to pass TUV, CSA or UL test at extra cost |
Operation Instructions |
 
|
Application Notes |
• In order to get better film coating, the substrate shall be treated by plasma cleaner
(Please click on the first picture below for more information)- • Use ultrasonic processor to disperse nanopowder or homogenize solution to get better coating
(Please click on the second picture below for more information) - • The compact dip coater can be put in the MTI glovebox to operate under control atmosphere
- • Click here to visit our Knowledge Center and learn about dip coating
- • Please put the coater into a fume-hood as pic below right, if liquid release vapor
   
|
| Net Weight | 50 lbs |
| Shipping Weight | 100 lbs |
