Dipping/Pulling speed
|
• 1-200 mm/minute Adjustable - • Accuracy: +/- 0.05%
- • Note： Higher Dipping/pulling rate upto 1000mm/min is feasible upon request, addtional cost
($1800) will apply.
|
| Dipping/Pulling traveling | 0-75mm Adjustable |
Voltage
|
• DC24V, 90W max- • A universal power adapter for 100-240 VAC input voltage is included.
- • The equipment can be used under Ar gas glovebox.
|
| Sample holder | Two screw sample clips are installed in the sample holder in order to carry the samples sliding up and down through two guide rods
|
Beaker Holder
| The beaker which contains the coating material (coating solution) will be placed into the slot of the beaker holder |
| Solution container | One 150ml beaker is included |
| Max. Sample size | 50mm(L) x 25mm(W) x 2.5mm(T) |
| Sample weight | less than 250g |
| Dipping/Pulling Motor | Stepping motor |
| Product dimension | 340mm(L) x 360mm(W) x 540mm(H) |
| Certificate | CE Certified |
| Warranty | One year limited with lifetime support
|
| Operation Manual |  |
Application note |
• In order to get better film coating, the substrate shall be treated by plasma cleaner
(Please click on the first picture below for more information)- • Use an ultrasonic processor to disperse nanopowder or homogenize solution to get better coating
(Please click on the second picture below for more information) - • Extension frame will support coating for a larger sample (Please click on the third picture below for
more information) - • Click here to visit our Knowledge Center and learn about dip coating
- • Click to learn about Fabrication of colloidal self-assembled monolayer (SAM) using monodisperse
silica and its use as a lithographic mask. - • Please put the coater into a fume-hood as pic below right, if liquid release vapor
   
|
| Net Weight | 45 lbs |
| Shipping Weight | 100 lbs |
