Working Power | - 100 - 240V AC, 50/60Hz
- 350 W
|
Required Air Pressure
| - Recommended 0.6 - 1.0 MPa Pressure
- Recommended gas consumption rate: 0.25 - 0.5 m3/ minute
- An air compressor is required but is NOT included. (Please order one from a local store )
|
Particle | - Input: 100 - 200 mesh
- Output: 2 - 15 micron, 50-500g/hr
- The output particle size is depended on material hardness and input particle size. Coarse particles may need 3-5 times milling to obtain the finest size.
|
Particle collecting | - One output particle collecting bag is included for immediate use
|
Optional | - A pre-crushing mat be needed to achieve finer particles during jet milling ( Click pic. 1 to order )
- An optional sieve can be used to filter the sample to 100-200 mesh to meet the input requirements. Please click the picture (Pic,2) to order the MSK-SYU-3 sieving system
- A lab-scale cyclone system may be connected to the jet mill with a filter collect fine powder easily (Pic. 3-4)
Pic. 1 Pic. 2 Pic. 3Pic. 4
|
Mill Liner | - High purity fully sintered alumina
|
Powder Feeder | - Automatic powder feeder controlled by vibration frequency
- Frequency: 40-400Hz adjustable
|
Net Weight | |
Shipping Weight | |
Dimensions
| |
Warranty | One year limited warranty with lifetime technical support |
Demo Video
| Jet milling with filter bag jet milling with cyclone |